Printer Port - Advantech UniGateway EH-2101W User Manual

Printer Port

Normally, these settings do not need to be changed.
AppleTalk
AppleTalk zone
Printer Object Type
Communication
Protocol
Logical Printers
No (L1, L2, L3)
Pre-string (HEX)
Post-string (HEX)
LF to CR/LF
Figure 41: Printer Port Screen
This determines which Apple systems can gain access to this
printer. The default value is *, which allows access by all sys-
tems. If you enter another zone name, only Apple systems in that
zone will be able to access the printer.
Sets the type of printer attached. The default setting is "Laser-
Writer"
If the "Printer Object Type" is incorrect, the printer will not be
visible from your Apple system.
You must use the same setting as your Macintosh.
Logical printer configuration is only required if using LPD
printing under Linux or Unix. Otherwise, these settings are
ignored
There are 3 Logical Printers (Ports), named L1, L2, and L3.
These names can not be changed, and must be used when select-
ing the logical printer from your Unix system.
Enter (in HEX) the series of printer commands to be sent to the
attached printer BEFORE each print job.
Enter (in HEX) the series of printer commands to be sent to the
attached printer AFTER each print job.
If checked, Unix-style LF (line feed) characters at the end of each
line will be converted to CR/LF (carriage return/line feed) pairs,
as used in MSDOS and Windows.
Advanced Configuration
75