Wireless Screen - Advantech UniGateway EH-2101W User Manual

Wireless Screen

The Wireless Access Point settings must match the other Wireless stations. To change the
UniGateway EH-2101W's default settings for the Wireless Access Point feature, use the
Wireless link on the main menu to reach the Wireless screen. An example screen is shown
below.
Data - Wireless Screen
Identification
Regulatory
Domain
Station name
SSID
(ESSID)
Options
Channel No.
Figure 6: Wireless Screen
It is illegal to use this device in any location outside of the regulatory
domain.
This is the same as the "Device Name" for the UniGateway EH-
2101W.
On your PC, some Wireless status screens may display this name as the
name of the Access Point in use.
•
If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set Identi-
fier).
•
To communicate, all Wireless stations should use the same
SSID/ESSID.
•
Select the Channel you wish to use on your Wireless LAN.
•
If you experience interference (shown by lost connections and/or
slow data transfers) you may need to experiment with different
channels to see which is the best.
•
If using multiple Access Points, adjacent Access Points should use
different Channels to reduce interference.
Setup
17