6. SETUP EXAMPLES
The Modbus Gateway can be used to integrate Modbus networks in a wide variety of settings. But,as each setting
has its own requirements, users may not understand how a gateway helps, or if it is appropriate for their needs.
The following scenarios are examples only and many others are possible.
LOG INTO YOUR BB-MESP211T
1. Access the Port 1 - Serial setup screen by clicking the link on the left side of the screen.
2. Configure Port 1 – serial settings. In this case, it is RS-232, 19.2 kbps, 8 data bits, 1 stop bit, and no
parity. To save the settings, click the Save button.
3. Access Port 1 Modbus by clicking the link on the left side of the screen.
Modbus Gateway – BB-MESP211T
Serial Port 1 Setup
48