Pcsa-Chg90 Camera Unit (Optional) - Sony IPELA PCS-HG90 Operating Instructions Manual

m AUDIO OUT jacks (phono jacks)
Connect to the audio inputs of the TV
monitor.
n AUDIO IN AUX 1 connectors (XLR
)
Connect to the XLR
outputs of the optional VCR or audio
equipment.
o AUDIO OUT connectors (XLR
Connect to the XLR
inputs of the optional TV monitor, VCR
or audio equipment.
p AUX CONTROL connector (D-sub
9-pin)
Used for maintenance service.
q CTRL-S jack (minijack)
Connect to the supplied Remote Control
Receiver.
r CAMERA CONTROL (VISCA)
MAIN/SUB connectors (mini DIN
7-pin)
Connect to the VISCA input connector
of the camera.
s 100BASE-TX/10BASE-T connector
(8-pin modular)
Used to conduct a communication via a
LAN. Connect to a hub using the
category 5 cable.
t REC OUT (MIXED) connectors
(XLR )
Used when recording the audio signals
to minute a communication. The mixed
sounds of the local and remote parties
are output from these connectors.
u
(ground) terminal
U
Connect a ground wire.
v AC IN (AC power input) connector
Connect the supplied power cord.
164
Location and Function of Parts and Controls
Please read the Operating Instructions
supplied with the Camera Unit together with
this manual.
-type audio
)
-type audio
a Lens
PCSA-CHG90 Camera Unit
(Optional)
Front
1
2
3
Rear
5
VISCA RS-422
1 2 3 4 5 6 7 8 9
6
VISCA RS-232C OUT
MONITOR
HFBK-HD1
7
Bottom
qa
This is a 12-magnification optical zoom
lens.
4
8
DC IN 12V
HD-SDI
9
0
qs
qd