Starting A Multipoint Videoconference; Calling Remote Parties Using One Touch Dial - Sony PCS-TL50 Operating Instructions Manual

Starting a Multipoint Videoconference

Calling Remote Parties Using One Touch Dial

1
Make sure that "Multipoint Mode" is set to "Auto" in the Multipoint Setup
menu.
2
Select the remote party you want to start calling from the One Touch Dial
list in the launcher menu.
IP:012.345.678.912
ISDN:012345678912
1
Bob
ISDN
The system begins dialing the selected party, "Dialing (IP)" or "Dialing
(ISDN)" appears on the display.
3
Press the CONNECT/DISCONNECT (
Commander to open the submenu.
1
Bob
4
Select the remote party you want to call next from the One Touch Dial list.
When the system connects to the second remote party, the system
automatically enters the multipoint conference mode and the display changes
to four-split window.
2 3 4 5
John OSAKA NEW YORK
Disconnect
2 3
John OSAKA
Detailed Dial
Phone Book
6
One Touch Dial list
Dial
/ ) button on the Remote
Phone Book
Detailed Dial
Cancel
4 5 6
NEW YORK
Starting a Multipoint Videoconference
157