Paper Type Setup; Paper Tray Selection; Margin Shift With The Automatic Document Feeder; Margin Shift Using The Document Glass - Xerox Phaser 3100MFP/X User Manual

Phaser 3100MFP/X

Paper type setup

851 - ADVANCED FCT/SCAN. & PRINT/PAPER
1 Press , enter 851 using the keypad.
2 Select NORMAL or THICK with the buttons
and .
3 Confirm your choice by pressing the OK button.
4 Exit this menu by pressing the

Paper tray selection

The Automatic selection can have two meanings
depending on the paper size defined for the paper trays.
The following table describes the different cases.
Default tray
AUTOMATIC
Same paper
size in the
trays
Manual
AUTOMATIC The main tray is used.
Different
paper size in
Manual
the trays
852 - ADVANCED FCT/SCAN. & PRINT/TRAY
1 Press , enter 852 using the keypad.
2 Select the default paper tray to use, AUTOMATIC
or MANUAL, with the buttons
3 Confirm by pressing the OK button.
4 Exit this menu by pressing the
Margin Shift with the Automatic Document
Feeder
If you want to, you can offset the lateral margins of the
document to the left or right during the scanning from the
automatic document feeder.
853 - ADVANCED FCT/SCAN. & PRINT/ S.F.
1 Press , enter 853 using the keypad.
2 Setup the left / right margins offsets (by 0.5 mm
steps) with the buttons
3 Confirm by pressing the OK button.
4 Exit this menu by pressing the

Margin Shift using the Document Glass

If you want to, you can offset the lateral margins of the
document to the left or right during the scanning from the
document glass.
TYPE
button.
Tray used for copy
Selection between the
main tray and the
manual tray.
The manual tray is
used.
The manual tray is
used.
PAPER
and .
button.
MARGINS
and .
button.
- 27 -
854 - ADVANCED FCT/SCAN. & PRINT/
1 Press , enter 854 using the keypad.
2 Setup the left / right margins offsets (by 0.5 mm
steps) with the buttons
3 Confirm by pressing the OK button.
4 Exit this menu by pressing the

Left and right printing margin shift

If you want to, you can offset the lateral margins of the
document to the left or right during printing.
855 - ADVANCED FCT/SCAN. & PRINT/
1 Press , enter 855 using the keypad.
2 Setup the left / right margins offsets (by 0.5 mm
steps) with the buttons
3 Confirm by pressing the OK button.
4 Exit this menu by pressing the

Top and bottom printing margin shift

If you want to, you can offset the lateral margins of the
document towards the top or the bottom during printing.
856 - ADVANCED FCT/SCAN. & PRINT/TOP
1 Press , enter 856 using the keypad.
2 Setup the top / bottom margins offsets (by 0.5 mm
steps) with the buttons
3 Confirm by pressing the OK button.
4 Exit this menu by pressing the

Paper size setup

This menu allows you to define the default paper size of
the manual tray and the main tray. You can also setup the
default scanning width.
857 - ADVANCED FCT/SCAN. & PRINT/
1 Press , enter 857 using the keypad.
2 Select the paper tray for which you want to define
a default paper size with the buttons
3 Confirm by pressing the OK button.
4 Choose the paper size with the buttons
according to the following table:
Paper tray
MAN. TRAY A5, Statement, A4, Legal and Letter
AUTO. TRAY A5, Statement, A4, Legal and Letter
SCANNER LTR/LGL and A4
5 Confirm by pressing the OK button.
6 Exit this menu by pressing the
FLATBED MARG
and .
button.
PRINTER MARG
and .
button.
PRINT.
and .
button.
PAPER FORMAT
and .
or
Available paper size
button.