Standard Local Print Settings
You can set the standard print settings for the machine. The Standard Local Print
Settings are used in the following cases:
•
If you print documents stored in inboxes without changing the print settings
•
If you merge and print multiple documents stored in an inbox
•
If you reset the settings before printing a document that has been sent from a
computer and stored in an inbox
1
4
2
4-54
Specifying Common Settings
(Additional Functions) ➞ [Common Settings] ➞
Press
[Standard Local Print Settings].
Select the desired standard local print settings for each mode
➞ press [Done].
Details of each item are shown below.
[Paper Select]: Select the paper source.
[Copies]: Set the number of copies from 1 to 9,999 sets.
[Finishing]: Set the type of finishing.
[2-Sided Print]: Set whether to perform two-sided printing.
[Erase Document After Printing]: Set whether to erase a document from memory
after it prints.
[Merge Documents]: Set whether to merge documents, if you select multiple
documents that are stored in an inbox for printing.