Table of Contents
Advertisement
No response/ Answer – [Forward No.]*1#
Unconditional – [Forward No.]*2#
It is important to send an activate/deactivate call forward message before setting up the
forward number. This function is only available under GK mode, and the GK supports H.450
Call Forward function. There are three conditions for user to set a forwarding number.
Step 1.
Busy Forward – while line is engaged or phone set is off-hook.
Step 2.
No response/Answer – while no one answer the call.
Step 3.
Unconditional – forward it unconditionally.
24.5 How to upgrade
Before you start downloading
Step 1.
Please confirm Host PC, which is installed as TFTP / FTP server and device is in
available network.
Step 2.
Remember the current configuration, such as [h323], [line], [pbook], and you change
configuration data.
Step 3.
It will list current version and default download method. Please check the Application
Rom in particular, it is showed version list, as well as the most common one you have to
upgrade.
Step 4.
General speaking, App Rom is named including product name and version and size is
under 1MB, such as 2fxs.115a. 2MB Rom is named such as 2m2fxs.115a. Please be very
careful of the prepared Rom file while upgrading.
Step 5.
Check Application Rom Version, input [rom –print] command
For example:
usr/config$ rom –print
Download Method : TFTP
Boot Rom : sdboot.200
Application Rom : 4afxs.203a
DSP App : 48302ce3.140
DSP Kernel : 48302ck.140
DSP Test Code : 483cbit.bin
usr/config$
Step 6.
Prepare FTP or TFTP server ready.
Upgrade steps: FTP Mode (Application Rom)
FXS H.323 VoIP Gateway User Manual
- 89 -
Advertisement
Table of Contents
