Pppoe Mode; Figure 3-4 Network Interface - Dynamix DW1-FXS User Manual

Step 2. Click [Commit Data] on the navigation panel. In the Commit Configuration Data
screen, click the Commit button. In the Commit Configuration Data screen to Display
[Commit to Flash OK!], When the Commit Data Ok.
Step 3. Click [Reboot System] on the navigation panel. In the VoIP VoIP Gateway screen,
click the [Reboot] button. It will take 40 seconds to reboot.
Step 4. Close the current browser windows and launch your web browser again. Enter the new
IP address in the Location or Address field.
3.5

PPPoE mode

Step 1. Configuration the VoIP Gateway IP address for PPPoE Mode. Click [Network
Interface] on the navigation panel. In the Network Interface screen, Select IP mode: PPPoE,
FXS H.323 VoIP Gateway User Manual

Figure 3-4 Network Interface

- 20 -