1. Manuals
  2. Brands
  3. Dynamix Manuals
  4. Gateway
  5. DW-01 Plus H
  6. User manual

Dynamix DW-01 Plus H User Manual

Hide thumbs Also See for DW-01 Plus H:
Table of Contents

Advertisement

Quick Links

Download this manual
DYNAMIX DW-01 Plus/H
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Dynamix DW-01 Plus H

Summary of Contents for Dynamix DW-01 Plus H

  • Page 1 DYNAMIX DW-01 Plus/H User’s Manual...

  • Page 2: Table Of Contents

    PREFACE..........................V PART I: Dynamix DW-01Plus/H GATEWAY OVERVIEW ..........1 1.1 Overview...........................2 1.2 Software Specifications ......................3 1.3 Hardware Specifications......................4 PART II: START-UP ......................8 2.1 Software Installation Guide....................10 2.1.1 Default Settings of Dynamix DW-01Plus/H gateway............10 2.1.2 Additional Installation Requirements.................10 2.1.3 Essential Configuration via Web Management interface ............12 2.1.4 Essential Configuration via Telnet Command Line interface..........21...
  • Page 3 4.3.14 Version and Information Screen..................69 4.3.15 ROM Configuration Screen .....................70 4.3.16 Flash Clean Screen ......................71 4.3.17 Commit Configuration Data Screen.................72 4.3.18 Reboot Dynamix DW-01Plus/H System screen ...............73 PART V: TELNET COMMAND INTERFACE..............74 5.1 Login............................75 5.2 Save and Reboot........................75 5.3 System Commands Overview ....................77 5.3.1 [help] ..........................77...
  • Page 4 5.3.6 [commit] .......................... 83 5.3.7 [ifaddr]..........................84 5.3.8 [time] ..........................87 5.3.9 [ping] ..........................87 5.3.10 [sysconf] ........................88 5.3.11 [h323]..........................91 5.3.12 [line] ..........................95 5.3.13 [prefix] ........................... 97 5.3.14 [pbook] .......................... 99 5.3.15 [voice].......................... 102 5.3.16 [support]........................105 5.3.17 [sysinfo] ........................

  • Page 5: Part I: Dynamix Dw-01Plus/H Gateway Overview

    Dynamix DW-01Plus/H Gateway User Manual Part I: Dynamix DW-01Plus/H Gateway Overview This part introduces the software/hardware specifications and default settings of the Dynamix DW-01Plus/H Gateway. - 1 -...

  • Page 6: Overview

    Dynamix DW-01Plus/H Gateway User Manual 1.1 Overview The Dynamix DW-01Plus/H is a one-port telephone extension and three ports SOHO Router to IP network gateway. It provides Data transfer by 10/100Mbps, telephone services and T.38 fax over IP network with easily operation and configuration.

  • Page 7: Software Specifications

    Dynamix DW-01Plus/H Gateway User Manual 1.2 Software Specifications  Dynamix DW-01Plus/H Gateway Features  Provide Voice over IP and Fax over IP features.  Built-in NAT/IP sharing function  FSK and DTMF Caller ID  Transmit Voice and T.38 fax simultaneously ...

  • Page 8: Hardware Specifications

    Dynamix DW-01Plus/H Gateway User Manual  Remote Firmware Upgrade You can use FTP/TFTP to perform firmware upgrade for the Dynamix DW-01Plus/H Gateway from a remote location.  Security  Password protection for system management  Built-in NAT function.  Certification ...
  • Page 9 TEL (Orange): Light Blinking: Dynamix DW-01Plus/H IP side has incoming call. Light On: Dynamix DW-01Plus/H IP side is in communication. Light Off: IP Line of Dynamix DW-01Plus/H is in standby mode.  WAN/LAN (Green): Light on: Ethernet port successfully connected with network.
  • Page 10 RJ-11 connector, Dynamix DW-01Plus/H interface to connect analog phone sets or trunk port of PABX.  PSTN Port (Dynamix DW-01Plus/H Only): RJ-11 connector, Dynamix DW-01Plus/H interface to CO PSTN line or extension port of PABX.  DC 12V Port: DC 12V Power supply.

  • Page 11: Part Ii: Start-Up

    Dynamix DW-01Plus/H Gateway User Manual Part II: Start-UP This part explains how to configure essential and basic items before user can run Dynamix DW-01Plus/H gateway. - 7 -...

  • Page 12: Software Installation Guide

    2.1.2 Additional Installation Requirements In addition to the contents of your package, there are other hardware and software requirements you need before you can install and use your Dynamix DW-01Plus/H Gateway. These requirements include: 1. A computer with an Ethernet NIC (Network Interface Card) installed.
  • Page 13 PC can automatically search for DHCP server and get one valid IP address. Dynamix DW-01Plus/H has embedded DHCP server (default is enabled) so that your PC will get one IP address from Dynamix DW- 01Plus/H DHCP server. Step 4.Open your browser and input IP address 192.168.123.123...

  • Page 14: Essential Configuration Via Web Management Interface

    [Commit] button. In the Commit Configuration Data screen will Display [Commit to Flash OK!], when Dynamix DW-01Plus/H finished committing data. Step 2. Click [Reboot System] on the navigation panel. In the Dynamix DW-01Plus/H Gateway screen, click the [Reboot] button. It will take around 40 seconds to reboot.
  • Page 15 Dynamix DW-01Plus/H Gateway User Manual Step 3. Close the current browser windows and launch your web browser again. - 11 -...
  • Page 16 Dynamix DW-01Plus/H Gateway User Manual 2.1.3.2 Setup Network (1) Fixed IP To configure the VoIP Gateway IP address, please click [Network Interface] on the navigation panel. In the Network Interface screen, type a new IP address, subnet mask and the default routing gateway (e.g. IP Address: 192.168.13.62, Subnet mask: 255.255.248.0, Default routing gateway: 192.168.8.254) and click the OK...
  • Page 17 Dynamix DW-01Plus/H Gateway User Manual (2) DHCP Click [Network Interface] on the navigation panel. In the Network Interface screen, enable the DHCP function if you are using the cable modem or DHCP server and click the [OK] button. - 13 -...
  • Page 18 Dynamix DW-01Plus/H Gateway User Manual (3) PPPoE Configuring the VoIP Gateway IP address for PPPoE Mode. Click [Network Interface] on the navigation panel. In the Network Interface screen, Select IP mode: PPPoE, and put the info of the PPPoE User Name, password, and Reboot After Remote Host Disconnection: Enable (e.g.
  • Page 19 DW-01Plus/H still can’t get contact with server, Dynamix DW-01Plus/H will keep trying to connect. After re-connected, Dynamix DW-01Plus/H will also restart system. On the other hand, if user disables this function, Dynamix DW-01Plus/H won’t reboot and keep trying to connect.
  • Page 20 Dynamix DW-01Plus/H Gateway User Manual 2.1.3.3 Application mode-GK/Peer-to-Peer Mode After setting IP address, user must assign Dynamix DW-01Plus/H to work under GK routed mode or Peer-to-Peer mode. If there is no Gatekeeper, please set your Dynamix DW-01Plus/H as Peer-to-Peer Mode. 2.1.3.3.1 GK routed mode GK mode means that there will be an intermediate Gatekeeper between Dynamix DW- 01Plus/H Gateway and the remote entity.
  • Page 21 Peer-to-Peer Mode function, set Line1 number and click the [OK] button. Step 2. Configure Phone Book in the Dynamix DW-01Plus/H Gateway. Click [Phone Book] on the navigation panel. In the Phone Book screen, enter the Index, Name, IP address and e164 (phone number) of the destination and click the Add Data button.
  • Page 22 Dynamix DW-01Plus/H Gateway User Manual - 18 -...

  • Page 23: Essential Configuration Via Telnet Command Line Interface

    [255.255.255.0], default router gateway as [192.168.1.254]. (2) DHCP usr/config$ ifaddr –mode 1 In this case is to enable DHCP mode of Dynamix DW-01Plus/H, once Dynamix DW-01Plus/H reboot system, it will automatically capture IP from DHCP server. (3) PPPoE Step 1. To Set PPPoE mode, please use [pppoe] command: usr/config$ ifaddr –mode 2...
  • Page 24 Dynamix DW-01Plus/H Gateway User Manual usr/config$ commit usr/config$ reboot Step 4. When Dynamix DW-01Plus/H successfully establish PPPoE connection, use command [ifaddr -print] to see detail information. For example: usr/config$ ifaddr -print IP mode : PPfPoE PPPoE adapter information Status : Ready IP address : 61.223.39.135...
  • Page 25 Dynamix DW-01Plus/H Gateway User Manual 2.1.4.3 Application mode-GK/Peer-to-Peer Mode After setting IP address, user must assign Dynamix DW-01Plus/H to work under GK routed mode or Peer-to-Peer mode. If there is no Gatekeeper, please set your Dynamix DW-01Plus/H as Peer-to-Peer Mode. 2.1.4.3.1 GK routed mode GK mode means that there will be an intermediate Gatekeeper between Dynamix DW- 01Plus/H Gateway and the remote entity.
  • Page 26 Dynamix DW-01Plus/H Gateway User Manual Step 2. Configure Phone Book, using “pbook” command. usr/config$ pbook –add name TEST1 ip 10.1.1.1 e164 10 In this case user add one callee record named as TEST1, IP address as 10.1.1.1, and mapping e.164 number as 10. After phone book data has been set, user can dial 10 to make a call for IP 10.1.1.1.

  • Page 27: Essential Configuration Via Installation Wizard

    Installation Wizard is a friendly software tool that can provide you an easy way to configure your Dynamix VoIP devices. You only need to Input the MAC address of your product and Click [Search Device]; you can configure your VoIP device without changing your PC’s setting.

  • Page 28: Special Housing Installation Guide

    Please follow procedures as below to change type you like. 2.1.1 Horizontal Type 2.1.1.1 Insert stand board on one side. 2.1.1.2 Insert the other stand board on the other side. 2.1.1.3 Finally Dynamix DW-01Plus/H can stand as horizontal type. - 24 -...

  • Page 29: Vertical Type

    Dynamix DW-01Plus/H Gateway User Manual 2.1.2 Vertical Type 2.1.2.1 Insert stand board on one side. 2.1.2.2 Insert the other stand board on the same side. 2.1.2.3 Finally Dynamix DW-01Plus/H can stand as vertical type. - 25 -...

  • Page 30: Part Iii: Special Applications And Features

    Dynamix DW-01Plus/H Gateway User Manual Part III: Special Applications and Features This part explains how to configure Dynamix DW-01Plus/H Gateway under special application mode, such as behind NAT, and how to upgrade firmware. - 26 -...

  • Page 31: Behind Ip-Sharing

    DMZ, some is named as virtual server. The VoIP messages from WAN have to completely pass forward to the LAN. It mean that if the Dynamix DW- 01Plus/H Gateway is assigned a virtual fixed IP Address such as 192.168.1.5, IP Sharing device must forward the VoIP message to 192.168.1.5.
  • Page 32 ▣ Activate DMZ DMZ Host IP: 192.168.1.5 Step 6. Configure the Dynamix DW-01Plus/H Gateway IP address for IP Sharing Mode. Click [Network Interface] on the navigation panel. In the Network Interface screen, enter the IP address, Subnet mask and the default gateway in the network table.
  • Page 33 Dynamix DW-01Plus/H Gateway User Manual Step 9. Click [Reboot System] on the navigation panel. In the VoIP Gateway screen, click the [Reboot] button. It will take around 40 seconds to reboot. Step 10. Close the current browser windows and launch your web browser again. Enter the new IP address in the Location or Address field.

  • Page 34: Nat Mode (Pppoe)

    Dynamix DW-01Plus/H Gateway User Manual 3.2 NAT mode (PPPoE) Step 1. Set PPPoE mode, using [ifaddr –mode 2], input the user id & password provided by your ISP, using [ifaddr –id –pwd], reboot the device after disconnection, using [ifaddr –reboot 1] usr/config$ ifaddr –mode 2...
  • Page 35 Dynamix DW-01Plus/H Gateway User Manual usr/config$ ifaddr -print IP mode : PPPoE PPPoE adapter information Status : Ready IP address : 61.223.39.135 Destination : 61.223.128.254 DNS primary : 168.95.192.1 Subnet Mask : 255.255.255.255 Authenticate : PAP Protocol : TCP/IP Device...
  • Page 36 LAN cannot have the same IP address. Set Default Gateway value as 192.168.123.123 in the [new gateway] field. Then save your change. PC can also use DHCP mode when DHCP server of Dynamix DW- 01Plus/H is enabled.

  • Page 37: Upgrade Your Dynamix Dw-01Plus/H

    Step 2. Note down your current configurations, such as [H323 Configuration], [Phone Book]. 3.3.1.2 Upgrade Version Step 1. To update the Dynamix DW-01Plus/H Gateway ROM Version, please click [ROM Upgrade] on the navigation panel. In the [ROM Configuration] screen, type TFTP/FTP Server IP address, Target File Name, Method, Target File Type (e.g.
  • Page 38 Dynamix DW-01Plus/H Gateway User Manual Step 3. Click [Flash Clean] on the navigation panel. In the Flash Clean screen, click the [CLEAN] button. Step 4. In the Flash Clean screen to Display [Flash cleaned!! Please reboot your system!!], when Flash Clean Ok.

  • Page 39: Upgrade Via Telnet Command Interface

    Dynamix DW-01Plus/H Gateway User Manual Step 5. Click [Reboot System] on the navigation panel. In the Reboot Dynamix DW- 01Plus/H Gateway screen, click the [Reboot] button. It will take 40 seconds to reboot. Step 6. Close the current browser windows and launch your web browser again. Enter the IP address in the Location or Address field.
  • Page 40 Dynamix DW-01Plus/H Gateway User Manual Parameter Usages: -print: show versions of all rom files. -app, boot, boot2m, dsptest, dspcore, dspapp, ht: To update main Application program code, Boot code, DSP testing code, DSP kernel code, or DSP application code, and Hold Tone file.

  • Page 41: Dynamix Dw-01Plus/H Pstn Line Application

    3.4.2 PSTN Incoming Call 3.4.2.1 VoIP TEL is busy Caller from PSTN side can still make a call to Dynamix DW-01Plus/H, PSTN LED will be blanking, when user hangs up IP call, TEL phone set will ring, and user can pick up the call from PSTN side.

  • Page 42: Part Iv: Web Management Interface

    Dynamix DW-01Plus/H Gateway User Manual Part IV: Web Management Interface This part explains how to configure the Dynamix DW-01Plus/H Gateway via WEB management interface. - 38 -...

  • Page 43: Login And Welcome Screen

    Dynamix DW-01Plus/H Gateway User Manual 4.1 Login and welcome screen Step 1. Start your web browser. Step 2. Launch your web browser and enter [192.168.123.123] (the default IP address of the LAN port) in the Location or Address field. Press Enter.

  • Page 44: Save And Reboot

    Click OK at the end of every configuration page to confirm your changes. All configurations will not take effect before reboot system. Please remember to do [Commit Data] to save all configuration then [Reboot System] to reboot Dynamix DW- 01Plus/H.

  • Page 45: Web Management Configuration

    Dynamix DW-01Plus/H Gateway User Manual 4.3 Web Management Configuration 4.3.1 Network Interface Click [Network Interface] in the navigation panel and open the Network Interface Screen. IP Mode: To configure the fixed or dynamic IP address for this unit. Please configure to PPPoE if the ADSL is using the PPPoE type.
  • Page 46 SNTP Server Address: Set SNTP Server Address When SNTP server is available, enable Dynamix DW-01Plus/H SNTP function to point to SNTP server IP address so that Dynamix DW-01Plus/H can get correct current time. GMT: Set time zone for SNTP Server time User can set different time zone according to the location of Dynamix DW- 01Plus/H.
  • Page 47 Set the EMS login user name. password: Set the EMS login password. time: Set the EMS search time. For example, if user configure the EMS time as 2, the Dynamix DW-01Plus/H will search the EMS server every 2 minutes. Note: The IP change function could support the GK from us only.

  • Page 48: H323 Configuration Screen

    Dynamix DW-01Plus/H Gateway User Manual 4.3.2 H323 Configuration Screen Click [H323 Configuration] in the navigation panel and open the H323 Configuration Screen. Mode: Pick up the calling mode for this gateway. GK routed: Users have to register on the GK if users picked up this option.
  • Page 49 Dynamix DW-01Plus/H Gateway User Manual define the phone book for this mode. Gatekeeper IP Address: Enter the GK ip if users pick up the GK routed mode. support on GK mode only. 2nd Gatekeeper IP: Support the secondary GK function.
  • Page 50 Dynamix DW-01Plus/H Gateway User Manual Port: The UDP port for the voice sending. RTP ports support a range of the UDP. The line 1 is using UDP (RTP) 16384 and (RTCP) 16385. The line 2 is using UDP (RTP) 16386 and (RTCP) 16387….etc. This configuration is defining the start port for the RTP packets.

  • Page 51: Line Configuration

    Dynamix DW-01Plus/H Gateway User Manual 4.3.3 Line Configuration Click [System Configuration] in the navigation panel and open the [System Configuration] Screen. The Line configuration will show the status of the registrations and the ports. It includes the hunt group, hotline, and no answer forward configuration.

  • Page 52: Phone Book Configuration Screen

    Dynamix DW-01Plus/H Gateway User Manual 4.3.4 Phone Book Configuration Screen Click [PPPoE Configuration] in the navigation panel and open the [PPPoE Configuration] Screen. The Phone Book configuration is only support the gateway in Peer-to-Peer mode. Add Data: User can specify 5 sets of phone book via Web Management Interface.

  • Page 53: Support Configuration Screen

    Dynamix DW-01Plus/H Gateway User Manual 4.3.5 Support Configuration Screen Click [Support Configuration] in the navigation panel and open the [Support Configuration] Screen. This gateway supports the FAX over IP, fast start function and other functions. T.38 FAX: Enable this function to support the FAX function.

  • Page 54: System Configuration Screen

    Dynamix DW-01Plus/H Gateway User Manual 4.3.6 System Configuration Screen Click [System Configuration] in the navigation panel and open the [System Configuration] Screen. Inter Digit Time: The call will be sent out if user didn’t enter the digits after this timer.
  • Page 55 Dynamix DW-01Plus/H Gateway User Manual Forward time: It supports the No Answer Forward function. If users configure it for 10, the call will be forwarded when it rings about 10 seconds. From 5 to 65535. Keypad Type: User could define the keypad for the DTMF sending.
  • Page 56 Dynamix DW-01Plus/H Gateway User Manual users configure this for 1. Only support FXO. Delay to add DTMF (FXO): The timer for sending DTMF signal, if the calls are from the IP to PSTN side. It could only support the one-stage-dialing function.

  • Page 57: Voice Configuration Screen

    Dynamix DW-01Plus/H Gateway User Manual 4.3.7 Voice Configuration Screen Click [Voice configuration] in the navigation panel and open the [Support Configuration] Screen. Codec Priority: Set priority preference of installed codes, G.723, G.711A, G.711U, G.729, G.729A, G.729B, and G.729AB. Frame Size: Set Specify sending packet size, G.723: 30/60/90, G.711A,...

  • Page 58: Phone Configuration Screen

    4.3.8 Phone Configuration Screen Click [Phone Configuration] in the navigation panel and open the [Phone Configuration] Screen. For tone simulation, Dynamix DW-01Plus/H Gateway adopts dual frequencies as traditional telephone does. If users want to have their own call progress tone, they can change the value of tones.
  • Page 59 Dynamix DW-01Plus/H Gateway User Manual Note: For tone simulation, VoIP Gateway adopts dual frequencies as traditional telephone does. If users want to have their own call progress tone, they can change the value of tones. High and Low frequency/level/cadence can be configured respectively.

  • Page 60: Rtp Pay Load Type Configuration

    Dynamix DW-01Plus/H Gateway User Manual 4.3.9 RTP Pay Load Type Configuration Click [RTP Payload Type Configuration] in the navigation panel and open the [RTP Payload Type Configuration] Screen. RFC2833 Payload Type: To define the payload type for RFC2833 type. DTMF Payload Type: To define the payload for the DTMF type.

  • Page 61: Ip Packets Tos Configuration Screen

    Dynamix DW-01Plus/H Gateway User Manual 4.3.10 IP Packets ToS Configuration Screen The Type of Service should be worked with the network router. The router will check all the packets if it support the TOS function. There is a field in the packet for the TOS value.
  • Page 62 Dynamix DW-01Plus/H Gateway User Manual DROP Precedence Class #1 Class #2 Class #3 Class #4 Low Drop Precedence (AF11) (AF21) (AF31) (AF41) 001010 010010 011010 100010 Medium Drop Precedence (AF12) (AF22) (AF32) (AF42) 001100 010100 011100 100100 High Drop Precedence...

  • Page 63: Ddns Screen

    Dynamix DW-01Plus/H Gateway User Manual 4.3.11 DDNS Screen Dynamix DW-01Plus/H supports DDNS function. Before using this function, please have a DDNS account and some info from your DDNS server. Click [Password configuration] in the navigation panel to open the [Password Configuration] screen.

  • Page 64: Prefix Configuration Screen

    Dynamix DW-01Plus/H Gateway User Manual 4.3.12 Prefix Configuration Screen The Prefix function is using the drop and inserts function. Click [Prefix Configuration] in the navigation panel and open the [Prefix Configuration] Screen. Index: Setting the index number for prefix record (max 30 record).

  • Page 65: Password Configuration Screen

    Dynamix DW-01Plus/H Gateway User Manual 4.3.13 Password Configuration Screen There are two login accounts in this unit. One is the “root” another is “administrator”. The default passwords for these two accounts are null. Users can define the passwords for these two accounts.

  • Page 66: Version And Information Screen

    Dynamix DW-01Plus/H Gateway User Manual 4.3.14 Version and Information Screen Users can get more detail about the software version for all the parts in this web page. Click [Version and Information] in the navigation panel and open the [Version and Information] Screen.

  • Page 67: Rom Configuration Screen

    FTP Login: Set FTP login name and password Target File Type: Select which sector of Dynamix DW-01Plus/H to upgrade Note: After upgrading 2mb file or Application, please remember to execute Flash Clean, which will clean all configurations become factory values except IP address.

  • Page 68: Flash Clean Screen

    Dynamix DW-01Plus/H Gateway User Manual 4.3.16 Flash Clean Screen Click [Flash Clean] in the navigation panel and open the [Flash Clean] Screen. Press CLEAN will clean all configurations of Dynamix DW-01Plus/H and reset to factory default value. Note: User must re-configure all commands all over again (except Network Configure) once execute this function.

  • Page 69: Commit Configuration Data Screen

    Dynamix DW-01Plus/H Gateway User Manual 4.3.17 Commit Configuration Data Screen Click [Commit Data] in the navigation panel and open the [Commit Configuration Data] Screen. Commit Date to save all configurations. Please remember to commit data before reboot your Dynamix DW-01Plus/H.

  • Page 70: Reboot Dynamix Dw-01Plus/H System Screen

    Dynamix DW-01Plus/H Gateway User Manual 4.3.18 Reboot Dynamix DW-01Plus/H System screen Click [Reboot System] in the navigation panel and open the [Reboot Dynamix DW- 01Plus/H Gateway] Screen. Press reboot will reset Dynamix DW-01Plus/H. Note: To execute reboot, please remember to do Commit Data before Reboot System.

  • Page 71: Part V: Telnet Command Interface

    Dynamix DW-01Plus/H Gateway User Manual Part V: Telnet Command Interface This part gives information on how to configure Dynamix DW-01Plus/H gateway via Telnet command line interface. - 67 -...

  • Page 72: Login

    Dynamix DW-01Plus/H Gateway User Manual 5.1 Login For you first login, enter the login: [root] and default no password. login: root password: Welcome to Terminal Configuration Mode Please enter your configuration item usr/config$ Note: Login account [root] or [administrator] is the default login account and there is no password needed.

  • Page 73: System Commands Overview

    5.3 System Commands Overview 5.3.1 [help] Press help/man/ ? will display all command list of Dynamix DW-01Plus/H. The following table lists all of the commands that you can use with the Gateway. Refer to the following chapters for descriptions of commonly used commands.

  • Page 74: Quit]

    Dynamix DW-01Plus/H Gateway User Manual 5.3.2 [quit] Type [quit] will quit the Gateway configuration mode. And turn back to login prompt. usr/config$ quit Disconnecting.. login: root Welcome to Terminal Configuration Mode Please enter your configuration item usr/config$ Note: It is recommended that type the [quit] command before you leave the console. If so, Gateway will ask password again when next user connects to console port.

  • Page 75: Reboot]

    Dynamix DW-01Plus/H Gateway User Manual  h323: h323 related information  voice related information delete: Remove specified debug flag. open: Start to show debug messages. close: Stop showing debug messages. In this example, user open debug flags including h323, vp, h323vp.

  • Page 76: Flash]

    Dynamix DW-01Plus/H Gateway User Manual 5.3.5 [flash] Clean the configuration stored in flash. usr/config$ flash Flash memory information and configuration Usage: flash [-clean] flash -clean Clean the configuration stored. Note: This command will clean the configuration stored in the flash and reboot it.

  • Page 77: Commit]

    Dynamix DW-01Plus/H Gateway User Manual For example: usr/config$ flash -clean Flash clean ok!! Rebooting ... Attached TCP/IP interface to cpm unit 0 Attaching interface lo0...done Hardware Type : 1FXS Set RTL8305SB no answer from 192.168.4.114 HTTPD initialized... cmInitialize succeed! Ras port:1024...
  • Page 78 Dynamix DW-01Plus/H Gateway User Manual usr/config$ ifaddr LAN information and configuration Usage: ifaddr [-print][-mode used][-ip IP Address][-mask Subnet Mask] [-gate Default Gateway][-dns 1 IP Address][-http portnumber] [-dhcpsv used][-nat used][-lanip IP Address][-sntp mode [server]] [-timezone GMT][-ipsharing used IP address][-ipchange used] [-id PPPoE username][-pwd PPPoE password][-reboot used][-emsip EMS IP]...
  • Page 79 Setup DNS Server IP Address. http: Assigned Gateway web browser connection port number, default port number 80. dhcpsv: Using this command to let Dynamix DW-01Plus/H as a DHCP server for LAN port. nat: Enable or Disable NAT function lanip: Specify LAN port IP address (For NAT function), use this command setup LAN IP address assigned to PC or other machine.

  • Page 80: Time]

    Set the EMS login password. emstime: Set the EMS search time. For example, if user configures the EMS time as 2, the Dynamix DW-01Plus/H will search the EMS server every 2 minutes. Note: The EMS server is a managed center, user can use it to upgrade firmware or restore the configuration.

  • Page 81: Sysconf]

    Dynamix DW-01Plus/H Gateway User Manual usr/config$ ping 192.168.1.2 no answer from 192.168.1.2 usr/config$ ping192.168.1.254 PING 192.168.1.254: 56 data bytes 64 bytes from 192.168.1.254: icmp_seq=0. time=5. ms 64 bytes from 192.168.1.254: icmp_seq=1. time=0. ms 64 bytes from 192.168.1.254: icmp_seq=2. time=0. ms 64 bytes from 192.168.1.254: icmp_seq=3.
  • Page 82 Dynamix DW-01Plus/H Gateway User Manual usr/config$ sysconf System information and configuration Usage: sysconf [-print][-idtime digit][-forwardtime digit][-keypad used] [-prefixsw used][-prefixdisab used][-usrdefprefix digits] [-codec used][-reverse used][-localrbt used][-roundtrip used] [-gwprefix used][-eod used] sysconf -print Display system overall information and configuration. -idtime Inter-Digits time (1~10 sec).
  • Page 83 Dynamix DW-01Plus/H Gateway User Manual according to various applications. In-band: Gateway will transfer DTMF signal via RTP payload. H.245 Alphanumeric via H.245 UII Alphanumeric. H.245 SignalType FXS (VoIP) via H.245 UII Singal Type. Q.931 UserInfo via Q.931 UserInfo. RFC2833 via RFC2833.

  • Page 84: H323]

    Dynamix DW-01Plus/H Gateway User Manual Note: User can also define IP address here in P2P mode, once user press “#”, Gateway will call out this IP address. dPSTN: This function can let user dial out by PSTN. User just need to press “*#”, the call signal will relay from IP side to PSTN side.
  • Page 85 Dynamix DW-01Plus/H Gateway User Manual usr/config$ h323 H.323 stack information and configuration Usage: h323 [-print][-mode used][-gk IP address][-algk IP address][-gwtype used] [-dfgw IP address][-prefix number][-line number][-passwd number] [-alias h323id][-display information][-gkid ID][-gkdis used] -print Display H.323 stack information and configuration. -mode Configure as Gatekeeper mode or Peer-to-Peer mode (0=Gatekeeper, 1=Peer-to-Peer).
  • Page 86 Dynamix DW-01Plus/H Gateway User Manual Parameter Usages: print: Print current h323 related settings mode: Alternatives for gatekeeper or peer-to-peer mode (0=gatekeeper mode; 1=peer-to-peer mode). If users select gatekeeper mode, an extra gatekeeper is needed when Gateway is in operation. usr/config$ h323 –mode 1 (peer to peer mode) Assign gatekeeper’s IP address when Gateway is in gatekeeper mode.
  • Page 87 Dynamix DW-01Plus/H Gateway User Manual gkfind: Gatekeeper finding port. Which Gateway uses it to discover a gatekeeper. Default value is 1718 (1024~65535). gkras: To set default gatekeeper RAS port number. Default value, is 1719 well- known port for RAS communication.

  • Page 88: Line]

    Dynamix DW-01Plus/H Gateway User Manual 5.3.12 [line] Line information and configuration. usr/config$ line Gateway line information and configuration Usage: line [-print][-config number [hunt number][hotline number] [forward number]] line -print Gateway line information. -config Set Gateway line information. hunt: Hunting group.

  • Page 89: Prefix]

    Dynamix DW-01Plus/H Gateway User Manual For example: usr/config$ line -print Line information and configuration Index Type Hunt Hotline No Answer Forward Registration Status ============================================================ ==================== FXS 1 Ready usr/config$ 5.3.13 [prefix] This command is for make rules for drop or insert prefix digits.
  • Page 90 Dynamix DW-01Plus/H Gateway User Manual usr/config$ prefix Prefix drop/insert information and configuration Usage: prefix [-print] [-add [prefix number][drop used][insert digits]] [-modify index [prefix number][drop used][insert digits]] [-delete index number] prefix -print Display drop/insert information. -add Add new prefix drop/insert information prefix : The prefix of dialed number.

  • Page 91: Pbook]

    Dynamix DW-01Plus/H Gateway User Manual modify: Modify a rule to drop or insert prefix digits of incoming call. usr/config$ prefix –modify 100 drop 0 insert 200 delete: Delete a rule to drop or insert prefix digits of incoming call. usr/config$ prefix –delte modify 100 drop 0 insert 200...
  • Page 92 Dynamix DW-01Plus/H Gateway User Manual usr/config$ pbook Phone book information and configuration Usage: pbook [-print] [-add [name string][e164 number][IP address][port number] [drop used][insert digits]] [-modify number [name string][e164 number][IP address][port number] [drop used][insert digits]] [-delete number] pbook -print Display phone book information and configuration.
  • Page 93 Dynamix DW-01Plus/H Gateway User Manual Parameter Usages: print: Print out current contents of Phone Book. Users can also add index number, from 1 to 100, to the parameter to show specific phone number. Note: Index number: means the sequence number in phone book. If users do request a specific index number in phone book, Gateway will give each record a automatic sequence number as index.

  • Page 94: Voice]

    Dynamix DW-01Plus/H Gateway User Manual 5.3.15 [voice] The voice command is associated with the audio setting information. There are four voice codecs supported by Gateway. - 90 -...
  • Page 95 Dynamix DW-01Plus/H Gateway User Manual usr/config$ voice Voice codec setting information and configuration Usage: voice [-print] [-send [G723 ms] [G729 ms] [G729A ms] [G729B ms] [G729AB ms] [G711U ms] [G711A ms] ] voice [-priority [G723] [G729] [G729A] [G729B] [G729AB] [G711U] [G711A] ]...
  • Page 96 Dynamix DW-01Plus/H Gateway User Manual Parameter Usages: print: Print current voice information and configurations. send: To define packet size for each codec. 20/40/60ms means to send a voice packet per 20/40/60 milliseconds. The smaller the packet size, the shorter the delay time.

  • Page 97: Support]

    Dynamix DW-01Plus/H Gateway User Manual usr/config$ voice -print Voice codec setting relate information Sending packet size : G.723.1 : 60 ms G.729 : 60 ms G.729A : 60 ms G.729B : 60 ms G.729AB : 60 ms G.711U : 40 ms G.711A...
  • Page 98 Dynamix DW-01Plus/H Gateway User Manual usr/config$ support Special Voice function support manipulation Usage: support [-print][-t38 used][-t38ecm used][-t38asn1 used][-faxrdd digits] [-fstart used][-tunnel used][-h245fs used][-earkyh245 used] [-h450 used] support -print Display support information and configuration. -t38 T.38(FAX) (0=Disabled, 1=Enabled). -t38rq T.38(FAX) Send request Mode.(0=Disabled, 1=Enabled).
  • Page 99 Dynamix DW-01Plus/H Gateway User Manual disable the request mode sending and 1 for request mode sending with the T.38. t38ecm: Enable or disable t38ecm function. The function is support the error correction in the high-speed fax mode. t38asn1: Enable or disable Enable ASN.1 function. The function is support with the FAX.

  • Page 100: Sysinfo]

    Dynamix DW-01Plus/H Gateway User Manual usr/config$ support -print Special Voice function support manipulation T.38(FAX) support : Disabled T.38(FAX) Request Mode : Enabled T.38(FAX) ECM : Disabled T.38(FAX) ASN.1 : Disabled FAX redundancy depth : 0 FastStart support : Disabled Tunneling support : Disabled H.245 message after FastStart support : Enabled...
  • Page 101 Dynamix DW-01Plus/H Gateway User Manual usr/config$ phone Phone ringing , ringback tone , busy tone , dial tone setting and notes Usage: phone [-print [ring][rbt][bt][dt][flash]] [-ring [freq ][ringON ][ringOFF ][ringLevel]] [-rbt [freqLo ][freqHi ][freqLoLev][freqHiLev] [Tone1ON][Tone1OFF][Tone2ON ][Tone2OFF ]] [-bt [freqLo ][freqHi ][freqLoLev][freqHiLev]...

  • Page 102: Tos]

    Dynamix DW-01Plus/H Gateway User Manual Parameter Usages: print: Print current call progress tone configurations (ring: ring tone, rbt: ring back tone, bt: busy tone, dt: dial tone). This parameter should be accompanied with tone type. ring: To set RING tone value. The played tone type, when Gateway is receiving a call.

  • Page 103: Ddns]

    Dynamix DW-01Plus/H Gateway User Manual Usr/config$ tos IP Packet ToS (Type of Service)/Differentiated Service configuration Usage: tos [-print][-rtptype dscp][-sigtype dscp] tos -print Display IP packet Tos configuration. -rtptype The packages of voice (0~63). -sigtype The package of call signal (0~63).
  • Page 104 Dynamix DW-01Plus/H Gateway User Manual usr/config$ ddns The dynamic DNS service information and configuration Usage: ddns [-print][-enable used][-server Address][-hostname Name][-id Account] [-passwd Password][-checkip used][-checkipsrv Address][-delay time] [-force IP] ddns -print Display Dynamic DNS information and configuration. -enable Use the dynamic DNS service(0=Disable, 1=Enabled).

  • Page 105: Pt]

    Dynamix DW-01Plus/H Gateway User Manual delay: Enable or disable the service delay time. force: Execute the DDNS function all the times. Note: Support DDNS Server: www.dyndns.org. For example: usr/config$ ddns -print Dynamic DNS service information Status : Enable Server : www.dyndns.org Host Name : totoro609.dnsalias.net...

  • Page 106: Rom]

    Dynamix DW-01Plus/H Gateway User Manual usr/config$ pt RTP payload type configuration and information Usage: pt [-print][-rfc2833 type][-dtmf type][-fax type][-faxbypass type] [-modembypass type][-redundancy type][-modemrelayp type] pt -print Display the RTP payload type information. -rfc2833 Configurate the DTMF RFC2833 payload type. -dtmf Configurate the DTMF payload type.
  • Page 107 Dynamix DW-01Plus/H Gateway User Manual usr/config$ rom ROM files updating commands Usage: rom [-print] [-app] [-boot] [-dsptest] [-dspcore] [-dspapp] [-ht] [-method used] [-boot2m] -s TFTP/FTP server ip -f filename rom -print -print show versions of rom files. (optional) -app update main application code(optional)

  • Page 108: Auth]

    Dynamix DW-01Plus/H Gateway User Manual To specify TFTP server’s IP address when upgrading ROM files. To specify the target file name, which will replace the old one. method: To decide using TFTP or FTP as file transfer server. [0] stands for TFTP, while [1] stands for FTP.

  • Page 109: Passwd]

    Dynamix DW-01Plus/H Gateway User Manual For example: usr/config$ auth -print Auth to customized the WEB configuration item for administrator. ifaddr : Enable h323 : Enable line : Disable pbook : Enable support : Disable sysconf : Disable voice : Enable...
  • Page 110 Dynamix DW-01Plus/H Gateway User Manual usr/config$ passwd Password setting information and configuration Usage: passwd [-set [Login name] [Password]][-clean] passwd -set Loginname Password. -clean Clear all password stored in flash. Note: 1. Loginname can be only 'root' or 'administrator' 2. passwd -clean will clear all passwd stored in flash, please use it with care.
  • Page 111 Dynamix DW-01Plus/H Gateway User Manual sr/config$ passwd -clean Please wait a moment!! Clean password OK. usr/config$ - 107 -...

Table of Contents