Overview - Dynamix DW1-FXS User Manual

The chapter introduces the VoIP Gateway general feature, factory default settings and hardware.
1.1 VoIP Gateway Overview
VoIP Gateway, which based on ITU-T H.323 v3, provides voice and fax over IP networks. Its
simplified operation and configuration features are the most suitable for residential and SOHO
application. There are four models for VoIP Gateway, which are Dynamix DW- 1 FXS,
Dynamix DW- FXS 02, and Dynamix DW- FXS 04. One more added switch hub for A
series is the only difference. User can choose 2 ports or 4 ports as request in A series. Just an
IP address and 2/4 phone sets bring you to Voice over IP world.
1.2 Features of The VoIP Gateway
VoIP Gateway Features
ITU-T H.323 v4 compliance
Ethernet:
Dynamix DW- 1 FXS : Four 10/100 Base-T Ethernet RJ45 ports (Auto LAN MDI/
MDIX).
Dynamix DW- FXS 02 /Dynamix DW- FXS 04: Two 10/100 Base-T Ethernet
ports
Configuration interface: RS-232, TELNET and HTTP web management
Automatic Gatekeeper Discovery
Dimensions:
Dynamix DW- 1 FXS : 165(W) x 29(H) x 139mm(D)
Dynamix DW- FXS 02/Dynamix DW- FXS 04: 222(W) x 34(H) x 143mm(D)
Transmit Voice and T.38 fax simultaneously
Support T.38 ECM function (Error Correction in high speed fax Mode)
Provides call progress tone
E.164 Common Dial Plan
DTMF Dialing
Inband/Outband DTMF
TFTP/FTP software upgrade
Remote configuration/reset
LED indication for system status
Support Static IP, DHCP and PPPoE
Set the ring back tone from the IP or local
FAX redundancy support
RAS and Signal port exchangeable
GK id support and GK auto discovery
FXS H.323 VoIP Gateway User Manual
Chapter 1
Dynamix DW FXS VoIP
Gateway Overview
- 2 -