Figure 24-19 Sysconf Commend List - Dynamix DW1-FXS User Manual

-eod
Example: sysconf -idtime 5
usr/config$
Parameter Usages:
-print: Print current sysconf settings.
-idtime: Set the duration (in second) of two pressed digits in dial mode as timed out. If after the
duration user hasn't pressed next number, it will dial out all number pressed (1-10
seconds).
-forwardtime: Set forward time (5-65535 seconds) for FXS Line. If call hasn't answered the call
in this time, call will be forward to assigned number in [line] command. (Please refer to
[line] command for forward setting.)
-keypad: Select DTMF replay type (0=In-band, 1=H.245 Alphanumeric, 2=H.245 SignalType,
3=Q.931 UserInfo, 4=RFC2833), Users can adjust the value according to various
applications. In-band: Gateway will transfer DTMF signal via RTP payload. H.245
Alphanumeric via H.245 UII Alphanumeric. H.245 SignalType FXS (VoIP) via H.245
UII Singal Type. Q.931 UserInfo via Q.931 UserInfo. RFC2833 via RFC2833.
-prefixsw: Switch on/off prefix function. If user enables prefix function, once user dials out,
gateway will automatically add prefix number before number user dialed.
-prefixdisab: Set disable key (0,1~9, *) to disable the prefix function in this current call. For
example, if user has set prefix as 100, and wants to dial out 100123, user can only press
123, to dial out 100123.However, if user wants to dial 123 without prefix, user can press
prefix disable key, for example [*], user can press [*], then dial 123, gateway will dial out
123 without adding prefix.
-usrdefprefix: Define prefix number.
Note:
The above three commands [prefixsw], [prefixdisab] and [usrdefprefix] have to work
together. If user would like to dial 9 to replace 123456789, he can firstly switch on the
command [sysconf -prefixsw 1], secondly to define the prefix digits as 12345678
[sysconf –usrdefprefix 12345678]. While user would like to dial other numbers, he can dial a
defined digit – [*] to disable the function [sysconf –prefixdisab *], then dial to the number he
wants to dial.
-codec: Set who is the one to determine voice codec during negotiation. 0 is caller will determine
the codec, and 1 is mater will determine the codec. (During negotiation 2 endpoints will
compare gateway type level to determine who is master.)
-localrbt: Enable or Disable locally generate ring back tone. Disable means gateway will receive
FXS H.323 VoIP Gateway User Manual
End of dial (0=Disable, 1=Enable).

Figure 24-19 sysconf commend list

- 102 -