Command Structure With Gateway; Figure 24-7 Password -Set Command - Dynamix DW1-FXS User Manual

Note:
Login account [root] or [administrator] is the default login account and there is no password
needed.
Set Password
To set your own password in root login name, just input command [passwd –set root ****].
For example, if password of root account is prepared as [voip], configuration it. When set
password ok, you can see ok message.
usr/config$ passwd -set root voip
Setting
Login: root
Password: voip
OK
usr/config$

24.3 Command Structure with Gateway

24.3.1 Setup IP Address
Use command [ifaddr] to configure Gateway IP Address and related information.
For example:
Step 1. Setting ip address
usr/config$ ifaddr –ip 192.168.1.11 –mask 255.2555.255.0 –gate 192.168.1.254
Description:
This is to configure Gateway IP Address as [192.168.1.11], subnet mask as [255.255.255.0],
default router gateway as [192.168.1.254].
Step 2. Ather the configuration [commit] and [reboot] the device.
usr/config$ commit
usr/config$ reboot
Note:
After configured the IP Address and input the [commit], then [reboot] process, user can start
to do other configurations via HTTPD.
Application Version 200 supports PPPoE function for user to set up the login ID and
password to connect to Internet. Please refer to PPPoE mode for how to set up PPPoE.
FXS H.323 VoIP Gateway User Manual
Figure 24-7 password –set command
- 77 -