1. Manuals
  2. Brands
  3. Dynamix Manuals
  4. Gateway
  5. DW IAD-162
  6. User manual

Dynamix DW IAD-162 User Manual

Voip gateway (sip)
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
D
y
n
a
m
D
y
n
a
m
i
x
D
i
x
D
V
o
I
P
G
a
V
o
I
P
G
a
User Manual
W
I
A
D
W
I
A
D
t
e
w
a
y
(
S
t
e
w
a
y
(
S
-
1
6
2
-
1
6
2
I
P
)
I
P
)

Advertisement

Table of Contents
loading

Related Manuals for Dynamix DW IAD-162

Summary of Contents for Dynamix DW IAD-162

  • Page 1 User Manual...

  • Page 2: Table Of Contents

    1.2 Software Specifications....................3 1.3 Hardware Specifications ....................4 Part II: Start-UP..........................7 2.1 Software Installation Guide ...................8 2.1.1 Default Settings of Dynamix IAD -162 Gateway ............8 2.1.2 Additional Installation Requirements................8 2.1.3 Essential Configuration via Web Management interface........9 2.1.3.1 Save Data and Reboot ..................9 2.1.3.2 Setup Network....................12...
  • Page 3 3.3.1 Call Hold – press [FLASH]..................33 3.3.2 Call Transfer – press [FLASH], then [transferring number] ........33 3.3.3 Call Forward: ......................33 3.4 Upgrade Your IAD......................35 3.4.1 Upgrade via Web management interface .............35 3.4.1.1 Before start ......................35 3.4.1.2 Upgrade Version ....................35 3.4.2 Upgrade via Telnet Command interface ..............37 3.5 IAD 162 PSTN Line Application ..................39 3.5.1 PSTN Outgoing Call ....................39 3.5.1.1 Make PSTN call from TEL Phone set.............39...
  • Page 4 4.3.14 Reboot IAD System screen...................63 Part V: Telnet Command Interface ..................64 5.1 Login..........................65 5.2 Save and Reboot ......................65 5.3 System Commands Overview..................66 5.3.1 [help] ...........................66 5.3.2 [quit]..........................67 5.3.3 [debug] ........................67 5.3.4 [reboot]........................68 5.3.5 [commit] ........................69 5.3.6 [ifaddr] .........................69 5.3.7 [time] ...........................73 5.3.8 [ping] ...........................73 5.3.9 [pbook] ........................73 5.3.10 [flash] ........................75...

  • Page 5: Preface

    Preface About this User’s Manual This user’s guide includes specifications, installation guide, web management and command line configuration interface for theDynamix IAD – 162 VoIP Gateway.

  • Page 6: Part I: Dynamix Iad -162 Gateway Overview

    Dynamia IAD – 162 Gateway Part I: Dynamix IAD -162 Gateway Overview This part introduces the software/hardware specifications and default settings of Dynamix IAD – 162 Gateway. - 1 -...

  • Page 7: Overview

    Dynamix IAD -162 Gateway 1.1 Overview Dynamix IAD - 161 is a one-port telephone extension and three ports SOHO Router to IP network gateway. It provides Data transfer by 10/100Mbps, telephone services and T.38 fax over IP network with easily operation and configuration. It is most suitable for SOHO and small-to-medium enterprise in Internet communication environment.

  • Page 8: Software Specifications

    Voice/DTMF Gain Settings System Monitoring System status (WAN, LAN, TEL, Status, Power) Remote Firmware Upgrade You can use FTP/TFTP to perform firmware upgrade for the Dynamix IAD -162 Gateway from a remote location. Security Password protection for system management Built-in NAT function.

  • Page 9: Hardware Specifications

    Dynamix IAD -162 Gateway 1.3 Hardware Specifications Chassis 190mm(W) x 110mm(D) x 51.5mm(H) Weight (unit): 0.3 kg Interface Four 10/100 Base-T Ethernet RJ-45 ports (Auto LAN MDI/MDIX). Input AC 100V-240V, Output DC 12V. One/Two RJ11 Telephone Port (IAD). Special Housing...
  • Page 10 Light on: Ethernet port successfully connected with network. Light Blanking: Ethernet port is transmitting or receiving data. PSTN (Orange): (Dynamix IAD - 162 only) Light Blinking: IAD IP side has incoming call. Light On: IAD PSTN side is in communication.
  • Page 11 Dynamix IAD -162 Gateway Ethernet connector（LAN/WAN） TEL Port: RJ-11 connector, IAD interface to connect analog phone sets or trunk port of PABX. PSTN Port (IAD 162 Only): RJ-11 connector, IAD interface to CO PSTN line or extension port of PABX.

  • Page 12: Part Ii: Start-Up

    Dynamix IAD -162 Gateway Part II: Start-UP This part explains how to configure essential and basic items before user can run Dynamix IAD – 162 gateway. - 7 -...

  • Page 13: Software Installation Guide

    2.1.2 Additional Installation Requirements In addition to the contents of your package, there are other hardware and software requirements you need before you can install and use your Dynamix IAD - 162 Gateway. These requirements include: 1. A computer with an Ethernet NIC (Network Interface Card) installed.

  • Page 14: Essential Configuration Via Web Management Interface

    Dynamix IAD -162 Gateway Step 2. Connect your PC to the LAN port of IAD Connect your PC to the LAN port of Dynamix IAD - 162 with standard CAT-5 straight Ethernet cable. Step 3. Set your PC as DHCP mode...
  • Page 15 Display [Commit to Flash OK!], when IAD finished committing data. Step 2. Click [Reboot System] on the navigation panel. In the Dynamix IAD -162 Gateway screen, click the [Reboot] button. It will take around 40 seconds to reboot.
  • Page 16 Dynamix IAD -162 Gateway Step 3. Close the current browser windows and launch your web browser again. - 11 -...

  • Page 17: Setup Network

    Dynamix IAD -162 Gateway 2.1.3.2 Setup Network (1) Fixed IP To configure the VoIP Gateway IP address, please click [Network Interface] on the navigation panel. In the Network Interface screen, choose the IP mode, type a new IP address, subnet mask and the default routing gateway (e.g. IP Address: 192.168.13.62,...
  • Page 18 Dynamix IAD -162 Gateway (2) DHCP Click [Network Interface] on the navigation panel. In the Network Interface screen, enable the DHCP function if you are using the cable modem or DHCP server and click the [OK] button. - 13 -...

  • Page 19: Application Mode-Proxy/Peer-To-Peer Mode

    Dynamix IAD -162 Gateway and the remote entity. While operating at this mode, Dynamix IAD -162 Gateway will first register to the Proxy Server located at the ISP side. For the following operation, it sends the INVITE message to the Proxy Server once you initiate a session.
  • Page 20 Dynamix IAD -162 Gateway (3) PPPoE Click [Network Interface] on the navigation panel. In the Network Interface screen, enable the PPPoE function if you are using the cable modem or DHCP server and click the [OK] button. - 14 -...
  • Page 21 2.1.3.3.2 Peer-to-Peer Mode Peer-to-Peer Mode allows users to call other VoIP devices without the proxy server. When in Peer-To-Peer mode, Dynamix IAD -162 Gateway use Phone Book, which will dial predefined phone number, and press “#” (optional, to accelerate the dial) as end of dial.
  • Page 22 Dynamix IAD -162 Gateway Step 2. Configure Phone Book in the IAD Gateway. Click [Phone Book] on the navigation panel. In the Phone Book screen, enter the Index, Name, IP address and e164 (phone number) of the destination and click the Add Data button.

  • Page 23: Essential Configuration Via Telnet Command Line Interface

    2.1.4 Essential Configuration via Telnet Command Line interface This section describes how to setup IAD via Telnet command line interface. Please follow procedures below to configure essential items before you use Dynamix IAD - 162 gateway. 2.1.4.1 Save Data and Reboot After any configuration has been made, user has to save all data and reboot system to make configurations take effect.

  • Page 24: Application Mode-Proxy/Peer-To-Peer Mode

    Dynamix IAD -162 Gateway usr/config$ reboot Step 5. When IAD successfully establish PPPoE connection, use command [ifaddr -print] to see detail information. For example: IP mode : PPPoE PPPoE adapter information Status : Ready IP address : 59.121.139.25 Destination : 59.121.128.254 LAN IP address : 192.168.123.123...
  • Page 25 Dynamix IAD -162 Gateway and the remote entity. While operating at this mode, Dynamix IAD -162 Gateway will first register to the Proxy Server located at the ISP side. For the following operation, it sends the INVITE message to the Proxy Server once you initiate a session.
  • Page 26 Dynamix IAD -162 Gateway server. When in Peer-To-Peer mode, Dynamix IAD -162 Gateway use Phone Book, which will dial predefined phone number, and press “#” (optional, to accelerate the dial) as end of dial. To configure Peer-To-Peer Mode in IAD Gateway, follow the steps below: Step 1.

  • Page 27: Essential Configuration Via Installation Wizard

    Dynamix IAD -162 Gateway 2.1.5 Essential Configuration via Installation Wizard Installation Wizard is a friendly software tool that can provide you an easy way to configure your VoIP devices. You only need to Input the MAC address of your product and Click [Search Device]; you can configure your VoIP device without changing your PC’s setting.

  • Page 28: Special Housing Installation Guide

    Dynamix IAD -162 Gateway 2.1 Special Housing Installation Guide adjustable Dynamix IAD - 162 has special housing for vertical or horizontal type. Please follow procedures as below to change type you like. 2.1.1 Horizontal Type 2.1.1.1 Insert stand board on one side.

  • Page 29: Vertical Type

    Dynamix IAD -162 Gateway 2.1.2 Vertical Type 2.1.2.1 Insert stand board on one side. 2.1.2.2 Insert the other stand board on the same side. 2.1.2.3 Finally IAD can stand as vertical type. - 24 -...

  • Page 30: Part Iii: Special Applications And Features

    Dynamix IAD -162 Gateway Part III: Special Applications Features This part explains how to configure Dynamix IAD – 162 Gateway under special application mode, such as behind NAT, and how to upgrade firmware. - 25 -...

  • Page 31: Behind Ip-Sharing

    WAN IP Address. Note: With Dynamic WAN IP Address, a valid Proxy for Dynamix IAD -162 Gateway to get register on is a must. In other word, it is not workable in Peer-to- Peer mode while dynamic WAN IP Address.
  • Page 32 DMZ Host IP: 192.168.1.5 Step 6. Configure the Dynamix IAD -162 Gateway IP address for IP Sharing Mode. Click [Network Interface] on the navigation panel. In the Network Interface screen, enter the IP address, Subnet mask and the default gateway in the network table.
  • Page 33 Dynamix IAD -162 Gateway Step 9. Click [Reboot System] on the navigation panel. In the VoIP Gateway screen, click the [Reboot] button. It will take around 40 seconds to reboot. Step 10. Close the current browser windows and launch your web browser again.

  • Page 34: More Than One Iad Behind The Same Ip Sharing Device

    Dynamix IAD -162 Gateway 3.1.1.2 More than one IAD behind the same IP Sharing Device Assign an IP address to each IAD using fixed address. Enable the IP Sharing function for each set using following command. Fixed IP Address –...
  • Page 35 Note: With Dynamic WAN IP Address, when the WAN IP is changed, we need to change the external IP of Dynamix IAD -162 Gateway using above command. Different Vendor’s Router will have different appearance of setting. Once you set the DMZ Host, you don’t need to configure the Port Forwarding and vice versa.

  • Page 36: Nat Mode (Pppoe)

    Dynamix IAD -162 Gateway 3.2 NAT mode (PPPoE) Set PPPoE mode, using [ifaddr –mode 2], input the user id & password Step 1. provided by your ISP, using [ifaddr –id –pwd], reboot the device after disconnection, using [ifaddr –reboot 1] usr/config$ ifaddr –mode 2...
  • Page 37 Dynamix IAD -162 Gateway EMS Password : ***** EMS cycle time usr/config$ When Gateway connection succeed. Setup PC use LAN IP connection Step 3. Network Select [Specify an IP Address] and enter [192.168.123.xxx] in the [IP Address] location (where xxx is a number between 2 and 254 used by the VoIP Gateway to identify each computer), and the default [Subnet Mask 255.255.255.0].

  • Page 38: Call Hold, Transfer And Forward

    Dynamix IAD -162 Gateway 3.3 Call Hold, Transfer and Forward Gateway provides call features including call hold, transfer and forward. Please be noted that both calling and called site have to support this feature. For call forward function, it only works under Proxy mode. Of course, Proxy must support these call features, too.
  • Page 39 Dynamix IAD -162 Gateway 3.3.3.2 Busy Forward: While line is engaged or phone set is been off-hook, incoming call will be forwarded to the assigned number. Activate: *76 [Forward No.] # Deactivate: #76# 3.3.3.3 Unconditional: Incoming call will be forwarded to the assigned number unconditionally.

  • Page 40: Upgrade Your Iad

    Step 2. Note down your current configurations, such as [SIP Information], [Phone Book]. 3.4.1.2 Upgrade Version To update the Dynamix IAD -162 Gateway ROM Version, please click Step 1. [ROM Upgrade] on the navigation panel. In the [ROM Configuration] screen, type TFTP/FTP Server IP address, Target File Name, Method, Target File Type (e.g.
  • Page 41 Dynamix IAD -162 Gateway Step 2. After upgrade finished, on screen will display [Please issue FLASH CLEAN to consist software version.] information. Step 3. Click [Flash Clean] on the navigation panel. In the Flash Clean screen, click the [CLEAN] button.

  • Page 42: Upgrade Via Telnet Command Interface

    Dynamix IAD -162 Gateway system!!], when Flash Clean Ok. Step 5. Click [Reboot System] on the navigation panel. In the Reboot Dynamix IAD - 162 Gateway screen, click the [Reboot] button. It will take 40 seconds to reboot. Step 6. Close the current browser windows and launch your web browser again.
  • Page 43 Dynamix IAD -162 Gateway Parameter Usages: -print: show versions of all rom files. -app, boot, boot2m, dsptest, dspcore, dspapp, ht: To update main Application program code, Boot code, DSP testing code, DSP kernel code, or DSP application code, and Hold Tone file.

  • Page 44: Iad 162 Pstn Line Application

    IP call, TEL phone set will ring, and user can pick up the call from PSTN side. The Dynamix IAD -162 Gateway has “call waiting tone” function, when IP side is under calling, if PSTN side has an incoming call, the user in IP side will hear a call waiting tone.

  • Page 45: Hotline Mode

    Dynamix IAD -162 Gateway 3.6 Hotline mode The Hotline Mode is applied in limited two peers. User just picks up the phone set and then hears ring back tone or dial tone depended on configurations of destination device. Step 1. Specify gateway service type as Hotline service.

  • Page 46: Reset Button Feature

    Dynamix IAD -162 Gateway 3.7 Reset Button Feature IAD has a reset button, it is using software reset. User just need to press this button 3 seconds, all of the configuration, including network interface configuration, will be back to default value.

  • Page 47: Part Iv: Web Management Interface

    Dynamix IAD -162 Gateway Part IV: Web Management Interface This part explains how to configure the Dynamix IAD – 162 Gateway via WEB management interface. - 42 -...

  • Page 48: Login And Welcome Screen

    Dynamix IAD -162 Gateway 4.1 Login and welcome screen Step 1. Start your web browser. Step 2. Launch your web browser and enter [192.168.123.123] (the default IP address of the LAN port) in the Location or Address field. Press Enter.

  • Page 49: Save And Reboot

    Dynamix IAD -162 Gateway 4.2 Save and Reboot Click OK at the end of every configuration page to confirm your changes. All configurations will not take effect before reboot system. Please remember to do [Commit Data] to save all configuration then [Reboot System] to reboot IAD.

  • Page 50: Web Management Configuration

    Dynamix IAD -162 Gateway 4.3 Web Management Configuration 4.3.1 Network Interface Click [Network Interface] in the navigation panel and open the Network Interface Screen. IP Mode: Select use defines the networking type for this gateway. It could support the Static, DHCP and PPPoE function.
  • Page 51 Dynamix IAD -162 Gateway WAN IP Address: Set WAN IP Address of IAD Subnet Mask: Set the Subnet Mask of IAD Default routing gateway: Set Default routing gateway of IAD NAT: Enable / Disable the Network Address Translation function DNS Server Obtained: Auto or Manual configure the DNS server, user can manual configure the Gateway’s DNS server IP address when it is under...
  • Page 52 Dynamix IAD -162 Gateway Note: When IAD is behind IP sharing device, if Proxy support behind NAT function, both IAD and IP sharing don’t need to do any configuration. Please contact with your proxy vendor more correct information before configuring IAD.

  • Page 53: Sip Information Screen

    Dynamix IAD -162 Gateway 4.3.2 SIP Information Screen Click [SIP Configuration] in the navigation panel and open the SIP Information Screen. Run Mode: Select IAD to work under Peer-to-Peer mode or Proxy mode. Primary Proxy IP Address: Set primary Proxy IP Address or URL address (Domain Name Server must be configured.
  • Page 54 Dynamix IAD -162 Gateway Line Account: set user name of IAD for registering. User can set user name and password for registering. If password is no need, please set user name the same as line number or IAD won’t register successfully.

  • Page 55: System Configuration

    Dynamix IAD -162 Gateway 4.3.3 System Configuration Click [System Configuration] in the navigation panel and open the [System Configuration] Screen. Keypad DTMF Type: set DTMF type. User can select DTMF type IAD transmits. RFC2833 Payload Type: change RFC2833 Payload type. This is for special request from the other site, if RFC2833 payload types of 2 sites are different, it may cause some problem of connection.

  • Page 56: Voice Configuration Screen

    Dynamix IAD -162 Gateway 4.3.4 Voice Configuration Screen Click [Voice Configuration] in the navigation panel and open the [Voice Configuration] Screen. Codec Priority: set codecs priority in order. Please notice that user can set from 1 to 5 codecs as their need. For example, user can only set first priority as G.723.1, and set the others as x, that means only G.723.1 is available.

  • Page 57: Phone Configuration Screen

    Dynamix IAD -162 Gateway 4.3.5 Phone Configuration Screen Click [Phone Configuration] in the navigation panel and open the [Phone Configuration] Screen. For tone simulation, IAD Gateway adopts dual frequencies as traditional telephone does. If users want to have their own call progress tone, they can change the value of tones.
  • Page 58 Dynamix IAD -162 Gateway On1 : On cadence of first cycle Off1 : Off cadence of first cycle On2 : On cadence of second cycle Off2 : Off cadence of second cycle Note: 1. If disconnect tone is single-frequency, user has to configure the same frequency value of “Low frequency”...

  • Page 59: Support Configuration Screen

    Dynamix IAD -162 Gateway 4.3.6 Support Configuration Screen Click [Support configuration] in the navigation panel and open the [Support Configuration] Screen. T.38 FAX: enable/disable FAX function. If user wants to fax with IAD gateway, this function must be enabled. FAX Redundancy Depth: Set the FAX redundancy.

  • Page 60: Phone Book Configuration

    Dynamix IAD -162 Gateway 4.3.7 Phone Book Configuration Click [Phone Book Configuration] in the navigation panel and open the [Phone Book] Screen. Add Data: User can specify 10 sets of phone book via Web Management Interface. Please input index, Name, IP Address and E.164 number of the destination device.

  • Page 61: Prefix Configuration Screen

    Dynamix IAD -162 Gateway 4.3.8 Prefix Configuration Screen Click [Prefix configuration] in the navigation panel and open the [Prefix Drop/Insert Configuration] Screen. Index: Setting the index number for prefix record (max 30 record). Prefix: Setting the prefix number of the whole numbers that could be into this VoIP gateway (1~20 digits).

  • Page 62: Dscp Configuration Screen

    Dynamix IAD -162 Gateway 4.3.9 DSCP Configuration Screen Click DSCP Configuration in the navigation panel and open the DSCP Configuration Screen. Set Signal or RTP Packet DSCP value: Assured Forwarding (AF) PHB: Select Delay priority and Drop Precedence Expedited Forwarding (EF) PHB:...
  • Page 63 Dynamix IAD -162 Gateway (AF12) (AF22) (AF32) (AF42) Medium Drop Precedence 001100 010100 011100 100100 (AF13) (AF23) (AF33) (AF43) High Drop Precedence 001110 010110 011110 100110 Please refer to RFC standard documents for more information about what is DSCP. - 58 -...

  • Page 64: Password Configuration Screen

    Dynamix IAD -162 Gateway 4.3.10 Password Configuration Screen Click [Password configuration] in the navigation panel to open the [Password Configuration] screen. It is highly recommended that you change the default password ([Null]). Change: First select login name as root or administrator, then enter current password, new password and confirm new password again to set new password.

  • Page 65: Rom Configuration Screen

    Dynamix IAD -162 Gateway 4.3.11 ROM Configuration Screen Click [ROM Upgrade] in the navigation panel and open the [ROM Configuration] Screen. FTP/TFTP Server IP Address: Set TFTP server IP address Target File name: Set file name prepared to upgrade Method:...

  • Page 66: Flash Clean Screen

    Dynamix IAD -162 Gateway 4.3.12 Flash Clean Screen Click [Flash Clean] in the navigation panel and open the [Flash Clean] Screen. Press CLEAN will clean all configurations of IAD and reset to factory default value. Note: User must re-configure all commands all over again (except Network Configure)

  • Page 67: Commit Configuration Data Screen

    Dynamix IAD -162 Gateway 4.3.13 Commit Configuration Data Screen Click [Commit Data] in the navigation panel and open the [Commit Configuration Data] Screen. Commit Date to save all configurations. Please remember to commit data before reboot your IAD. - 62 -...

  • Page 68: Reboot Iad System Screen

    Dynamix IAD -162 Gateway 4.3.14 Reboot IAD System screen Click [Reboot System] in the navigation panel and open the [Reboot IAD Gateway] Screen. Press reboot will reset IAD. Note: To execute reboot, please remember to do Commit Data before Reboot System.

  • Page 69: Part V: Telnet Command Interface

    Dynamix IAD -162 Gateway Part V: Telnet Command Interface This part gives information on how to configure Dynamix IAD – 162 gateway via Telnet command line interface. - 64 -...

  • Page 70: Login

    Dynamix IAD -162 Gateway 5.1 Login For you first login, enter the login: [root] and default no password. login: root password: Welcome to Terminal Configuration Mode Please enter your configuration item usr/config$ Note: Login account [root] or [administrator] is the default login account and there is no password needed.

  • Page 71: System Commands Overview

    This user’s guide describes commands that are helpful for configuring the Gateway. Using commands not documented in the user’s guide can damage the unit and possibly render it unusable. Commands with Dynamix IAD -162 Gateway Command DESCRIPTION help Input help/man/? to list all command list.

  • Page 72: Quit]

    Dynamix IAD -162 Gateway Command DESCRIPTION prefix Prefix drop/insert information manipulation line Line information manipulation 5.3.2 [quit] Type [quit] will quit the Gateway configuration mode. And turn back to login prompt. usr/config$ quit Disconnecting.. login: root Welcome to Terminal Configuration Mode...

  • Page 73: Reboot]

    Dynamix IAD -162 Gateway debug -open usr/config$ Parameter Usages: -status: Display the enabled debug flags. -add: Add debug flag. -- sip: sip related information -- msg: voice related information -delete: Remove specified debug flag. -open: Start to show debug messages.

  • Page 74: Commit]

    Dynamix IAD -162 Gateway AC4804[0] is ok AC4804[1] is ok successful 2 2 Initialize OSS libraries...OK! VP v1.42 stack open sucessfully. login: 5.3.5 [commit] Save changes after configuring Gateway. usr/config$ commit This may take a few seconds, please wait.. Commit to flash memory ok!
  • Page 75 Dynamix IAD -162 Gateway -print Display LAN information and configuration. -mode Specify WAN IP mode (0=Static, 1=DHCP, 2=PPPoE). Specify WAN ip address. -lanip Specify LAN ip address. -mask Set Internet subnet mask. -gate Specify default gateway ip address -nat Set NAT service flag (On/Off).
  • Page 76 Dynamix IAD -162 Gateway -mode: Set IP mode as static IP, DHCP or PPPoE. -ip: Assigned IP address for Gateway -lanip: Specify LAN port IP address (For NAT function), use this command setup LAN IP address assigned to PC or other machine.
  • Page 77 Dynamix IAD -162 Gateway automatically for the re-connect with the PPPoE server. -emsip: Set the EMS server IP address. -emsid: Set the EMS login user name. -emspwd: Set the EMS login password. -emstime: Set the EMS search time. For example, if user configures the EMS time as 2, the IAD will search the EMS server every 2 minutes.

  • Page 78: Time]

    Dynamix IAD -162 Gateway 5.3.7 [time] When SNTP function of Gateway is enabled and SNTP server can be found as well, type [time] command to show current network time. usr/config$ time Current time is WED SEP 17 12:36:49 2003 usr/config$ 5.3.8 [ping]...
  • Page 79 Dynamix IAD -162 Gateway pbook [-insert [index] [ip ipaddress] [name Alias] [e164 phonenumber] [port numb er]] pbook [-delete index] pbook [-modify [index] [ip ipaddress] [name Alias] [e164 phonenumber] [port numb er]] -print Display phonebook data. -add Add an record to phonebook.

  • Page 80: Flash]

    Dynamix IAD -162 Gateway Note: Index number: means the sequence number in phone book. If users do request a specific index number in phone book, Gateway will give each record a automatic sequence number as index. -add: add a new record to phone book. When adding a record, users have to specify name, IP, and e164 number to complete the command.
  • Page 81 Dynamix IAD -162 Gateway usr/config$ flash Flash memory information and configuration Usage: flash [-clean] flash -clean Clean the configuration stored. Note: This command will clean the configuration stored in the flash and reboot it. usr/config$ Parameter Usages: -clean: clean all the user defined value, and reboot Gateway in factory default mode.

  • Page 82: Sysconf]

    Dynamix IAD -162 Gateway WorkMode : PROXY_MODE Start registering to Proxy server AC4804[0] is ok AC4804[1] is ok successful 2 2 Initialize OSS libraries...OK! VP v1.42 stack open successfully. login: 5.3.11 [sysconf] This command displays system information and configurations. usr/config$ sysconf...
  • Page 83 -service: set SIP Phone to be normal mode or under hotline mode. (sysconf –service 0/1, 0 for normal service, 1 for hotline service.) -keypad: DTMF replay type. When value is “1”, Dynamix IAD -162 Gateway will transfer DTMF signal via RTP payload as defined in RFC2833. When the value is set to “0”, the DTMF type is set as In-band, and 2 for SIP info DTMF.

  • Page 84: Sip]

    Dynamix IAD -162 Gateway Inter-Digits time BusyForward : OFF Keypad DTMF type : In-band End of Dial Digit Caller ID Type DTMF Caller ID Start Symbol : D DTMF Caller ID End Symbol RFC2833 Payload Type : 96 FAX Payload Type...
  • Page 85 -mode: Configure as Proxy mode or Peer-to-Peer mode (0: Peer-to-Peer mode, 1: Proxy mode). -px: to specify Proxy address when Dynamix IAD -162 Gateway is in proxy mode. Proxy address can be IPv4 address or DNS name. -px2: to setting Secondary Proxy server address. Proxy address can be IPv4 address or DNS name.

  • Page 86: Security]

    Dynamix IAD -162 Gateway Line1 : 1001 pbook search : OFF SIP listen port : 5060 RTP receive port : 16384 usr/config$ usr/config$ sip –print Run Mode : PROXY MODE Primary Proxy address : 10.1.1.2 Secondary Proxy address : null...

  • Page 87: Voice]

    Dynamix IAD -162 Gateway usr/config$ Parameter Usages: -print: print current setting in security command. -line: Specify which line number you want to set into the account Note: If you have only one account, you can set into line1 or line2 using this parameter.
  • Page 88 Dynamix IAD -162 Gateway G.729 (20/40/60/80 ms) -priority Priority preference of installed codecs. G.723 G.711U G.711A G.729 -volume Specify the following levels: voice volume (0~63, default: 25), input gain (0~38, default: 25), dtmf volume (0~31, default: 23), -nscng No sound compression and CNG. (G.723.1 only, On=1, Off=0).
  • Page 89 Dynamix IAD -162 Gateway (range 0~31, default: 23). -nscng: Silence suppression and comfort noise generation setting (1 = ON; 0 = OFF). It is applicable to G.723 codec only. usr/config$ voice -nscng g723 1 -echo: On or Off the activate each canceler.

  • Page 90: Support]

    Dynamix IAD -162 Gateway 5.3.15 [support] This command provides some extra functions that might be needed by users. usr/config$ support Special Voice function support manipulation Usage: support [-t38 enable] [-busy number] [-noanswer number] [-uncon number] support -print -t38 T.38(FAX) enabled/disabled.

  • Page 91: Tos]

    Dynamix IAD -162 Gateway Special Voice function support manipulation T.38(FAX) support : Disabled Forward Numbers Busy Forward number: 0123456789 NoAnswer Forward number: 0212345678 Uncondition Forward number: usr/config$ 5.3.16 [tos] This command is for setting Differentiated Service Code Point configuration. usr/config$ tos...

  • Page 92: Phone]

    Dynamix IAD -162 Gateway Media Packet DSCP Code : 0 usr/config$ 5.3.17 [phone] Gateway progress tone is configurable. Default tone value is set according to U.S. tone specification. Users may adjust the values according to their own country’s tone specification or users-defined tone specification.
  • Page 93 Dynamix IAD -162 Gateway ringing ring ON/OFF : 0 ~ 8000 (Unit : ms) ringing level ~ 94 (Unit : V) tone frequency : 0 ~ 65535 (Unit : Hz) tone freqLevel : 0 ~ 65535 (Unit : mVrms) tone...
  • Page 94 Dynamix IAD -162 Gateway Phone ringback tone paramter Ringback Tone frequency high : 480 Ringback Tone frequency low : 440 Ringback Tone frequency high level : 155 Ringback Tone frequency low level : 155 Ringback Tone tone1 on : 2000...

  • Page 95: Bureau]

    Dynamix IAD -162 Gateway usr/config$ phone -print dt Phone dial tone paramter Dial Tone frequency high : 440 Dial Tone frequency low : 350 Dial Tone frequency high level : 155 Dial Tone frequency low level : 155 Dial Tone tone1 on...

  • Page 96: Rom]

    Dynamix IAD -162 Gateway bureau -hotline 1 192.168.4.69 628 2 192.168.4.200 999 usr/config$ Parameter Usages: -print: Display current Hotline table. -hotline: Define Line1 Hotline table respectively. The table is included [Line number], [destination IP Address] and [destination Port or Number].
  • Page 97 Dynamix IAD -162 Gateway -print show versions of rom files. (optional) -app update main application code(optional) -boot update main boot code(optional) -boot2m update 2M code(optional) updata Hold Tone PCM file(optional) -dsptest update DSP testing code(optional) -dspcore update DSP kernel code(optional)

  • Page 98: Auth]

    Dynamix IAD -162 Gateway For example: usr/config$ rom -print Download Method : TFTP Boot Rom : sdboot.200 Application Rom : 1asipIAD.107 DSP App : 48302ce3.140 DSP Kernel : 48302ck.140 DSP Test Code : 483cbit.bin Hold Tone : holdtone.101 usr/config$ 5.3.20 [auth] For security concern, the “root”...

  • Page 99: Passwd]

    Dynamix IAD -162 Gateway Root can control what command administrator can use. ifaddr : Enable : Disable line : Disable pbook : Enable support : Disable sysconf : Disable voice : Disable phone : Disable : Disable : Disable prefix...

  • Page 100: Prefix]

    Dynamix IAD -162 Gateway usr/config$ Parameter Usages: –set: Set login name and password, input login name then input new password. -clean: Will clear all password setup, and change null. Note: Gateway Login name only use [root] or [administrator]. [root] and [administrator] have the same authorization, except commands that can be excuted by [Login name: root] only [passwd –set root], [rom –boot], [room-boot2m] and [flash –clean].

  • Page 101: Line]

    Dynamix IAD -162 Gateway prefix The prefix of dialed number. drop Drop prefix(Enable:1/Disable:0). insert Insert digits. Example: prefix -add prefix 100 drop 1 insert 2000 prefix -add prefix 100 drop 1 prefix -add prefix 100 drop 0 insert 200 prefix -delete 1...
  • Page 102 Dynamix IAD -162 Gateway line -print Gateway line information. Example: line -print usr/config$ Parameter Usages: -print: display line status For example: usr/config$ line -print Line information and configuration Line Reg. Status ================= Ready usr/config$ - 97 -...

Table of Contents