Figure 24-49 Passwd Commend List; Figure 24-50 Passwd -Set Commend - Dynamix DW1-FXS User Manual

24.7.22 [passwd]
For security concern, users have to input the password before entering configuration mode.
[passwd] command is for password setting purpose.
usr/config$ passwd
Password setting information and configuration
Usage:
passwd [-set [Login name] [Password]][-clean]
passwd -set Loginname Password.
-clean Clear all password stored in flash.
Note:
1. Loginname can be only 'root' or 'administrator'
2. passwd -clean will clear all passwd stored in flash,
please use it with care.
Example:
passwd -set root Your_Passwd_Setting
passwd -clean
usr/config$
Parameter Usages:
–set: Set login name and password, input login name then input new password.
-clean: Will clear all password setup, and change null.
Note:
Gateway Login name only use [root] or [administrator]. [root] and [administrator] have the
same authorization, except commands that can be excuted by [Login name: root] only
[passwd –set root], [rom –boot], [room-boot2m] and [flash –clean].
For example:
usr/config$ passwd -set root root1234
Setting
login: root
Password: root1234
OK
usr/config$
FXS H.323 VoIP Gateway User Manual

Figure 24-49 passwd commend List

Figure 24-50 passwd –set commend
- 127 -