Figure 24-10 Debug -Status Commend; Figure 24-11 Reboot Commend - Dynamix DW1-FXS User Manual

-close: Stop showing debug messages.
In this example, user open debug flags including h323, vp, h323vp.
usr/config$ debug -add h323 vp h323vp
usr/config$ debug –open
For example:
usr/config$ debug -status
Current debug type enabled :
Debug Mode is open
DEBUG-> H323VP H323
usr/config$
24.7.3 [reboot]
After [commit] command, type [reboot] to reload Gateway in new configuration. The
procedure is as below:
usr/config$ reboot
....Attached TCP/IP interface to cpm unit 0
Attaching interface lo0...done
Hardware Type : 4FXS
HTTPD initialized...
AC4804[0] is ok
AC4804[1] is ok
successful 2 2
Initialize OSS libraries...OK!
VP v1.44 stack open sucessfully.
cmInitialize succeed!
Ras port:1024
CallSignal port:1720
login:
FXS H.323 VoIP Gateway User Manual
Figure 24-10 debug –status commend

Figure 24-11 reboot commend

- 95 -