2.1
Web Configuration with FXS Overview
The embedded web configuration allows you to use a web browser to manage the VoIP
Gateway.
2.2
Accessing the Web Configuration
You will need a computer with and Ethernet 10BaseT, 100Base-TX Network Interface Card
(NIC). Connect to the LAN port in the FXS.
Use Internet Explorer 5.5 and later or Netscape Navigator 6 and later versions.
Use the following instructions to login on to the web configuration.
2.3
Login and welcome screen
Step 1.
Start your web browser.
Step 2.
Launch your web browser and enter [10.1.1.3] (the default IP address of the VoIP
Gateway) in the Location or Address field. Press Enter.
Step 3.
The Password screen now appears. Type [root] in the user name field (it may display
automatically for you) and your password (default [Null]) in the password field.
Step 4.
Click OK.
Step 5.
After a successful login, you will see the welcome screen show next.
2.4
Welcome Screen
This is the web configuration welcome screen. Click a link on the navigation panel to go to
the corresponding screen.
FXS H.323 VoIP Gateway User Manual
This Chapter describes how to login into the WEB and navigate through it.
Web Configuration with FXS Introduction
Chapter 2
- 13 -