Figure 24-12 Flash Commend List - Dynamix DW1-FXS User Manual

24.7.4 [flash]
Clean the configuration stored in flash.
usr/config$ flash
Flash memory information and configuration
Usage:
flash [-clean]
flash -clean Clean the configuration stored.
Note:
This command will clean the configuration stored in
the flash and reboot it.
usr/config$
Parameter Usages:
-clean: clean all the user defined value, and reboot Gateway in factory default mode.
Note:
It is recommended that use [flash –clean] after application firmware id upgraded.
Warning:
User whose login name is root only executes it. All configurations in command [ifaddr] will
be kept.
For example:
usr/config$ flash -clean
Flash clean ok!! Rebooting ...
Attached TCP/IP interface to cpm unit 0
Attaching interface lo0...done
Hardware Type : 4FXS
HTTPD initialized...
cmInitialize succeed!
Ras port:1024
CallSignal port:1720
FXS H.323 VoIP Gateway User Manual

Figure 24-12 flash commend list

- 96 -