Chapter 24 Command List; Hyper Terminal Setting; Figure 24-1 Connection Description; Figure 24-2 Connection Description - Dynamix DW1-FXS User Manual

This section introduces the command line interface and lists all of the commands.

24.1 Hyper Terminal Setting

A terminal emulator is needed when using RS-232 port to configure Gateway. There are
kinds of terminal emulator software. Here, we use Microsoft HyperTerminal to depict how to set
up terminal emulator:
Step 1. Execute the Hyper Terminal program, and then the following windows will pop-up on
the screen (START
Terminal).
Step 2. Define a name such as [3502] for this new connection, after pressing [OK] button.
Step 3. The next windows appear, and then choose COM1/2 Port, which you are going to use.
FXS H.323 VoIP Gateway User Manual
Program files

Figure 24-1 Connection Description

Figure 24-2 Connection Description

Accessories Communication
Chapter 24
Command List
Hyper
- 74 -