Figure 24-13 Flash -Clean Commend; Figure 24-14 Commit Commend - Dynamix DW1-FXS User Manual

AC4804[0] is ok
AC4804[1] is ok
successful 2 2
Initialize OSS libraries...OK!
VP v1.44 stack open sucessfully.
login:
24.7.5 [commit]
Save changes after configuring Gateway.
usr/config$ commit
This may take a few seconds, please wait..
Commit to flash memory ok!
usr/config$
Note:
Users shall use [commit] to save modified value, or they will not be activated after system
reboot.
24.7.6 [ifaddr]
Configure and display Gateway network information.
LAN information and configuration
Usage:
ifaddr [-print][-mode used][-ip IP Address][-mask Subnet Mask]
[-gate Default Gateway][-dns 1 IP Address][-http portnumber]
[-lanip IP
[-ipsharing used IP address][-ipchange used][-id PPPoE username]
[-pwd PPPoE password][-reboot used]
-print Display network information and configuration.
-mode
-ip Specify WAN port static IP address.
-mask
FXS H.323 VoIP Gateway User Manual
Figure 24-13 flash –clean commend

Figure 24-14 commit commend

Address][-sntp mode [server]][-timezone GMT]
Specify WAN IP mode (0=Static, 1=DHCP, 2=PPPoE).
Set WAN port static IP subnet mask.
- 97 -