System Commands Overview; Table 24-1 Commands With Gateway - Dynamix DW1-FXS User Manual

following chapters for descriptions of commonly used commands.
This user's guide describes commands that are helpful for configuring the Gateway. Using
commands not documented in the user's guide can damage the unit and possibly render it
Command
help
quit
debug
reboot
flash
commit
ifaddr
time
ping
sysconf
h323
line
prefix
pbook
voice
support
sysinfo
phone
tos
ddns
pt
rom
passwd

24.7 System Commands Overview

24.7.1 [quit]
Type [quit] will quit the Gateway configuration mode. And turn back to login prompt.
usr/config$ quit
Disconnecting..
FXS H.323 VoIP Gateway User Manual
unusable.

Table 24-1 Commands with Gateway

help/man/? [command]
quit/exit/close
Show debug message
Reboot local machine
Clean configuration from flash rom
Commit flash rom data
Internet address manipulation
Show current time
Test that a remote host is reachable
System information manipulation
H.323 information manipulation
Gateway line information and configuration
Prefix drop/insert information manipulation
Phonebook information and configuration
Voice information manipulation
Special Voice function support manipulation
System information
Setup of call progress tones and ringing (SLIC control)
IP Packet ToS (Type of Service) values
Dynamic DNS update manipulation
RTP payload type configuration and information
ROM file update
Password setting information and configuration
Description
- 93 -