Figure 24-33 Support -Print Commend - Dynamix DW1-FXS User Manual

-tunnel: Enable or disable H.245 tunneling function. The function is send H.245 (Call Control
messages) via H.225's (Call Signal messages) link. The function is effective only when
both side support h245 tunnel.
-h245fs: Enable or disable Gateway H.245 FastStart. The function is send h.245 messages after
FastStart.
-earlyh245: Enable or disable early H.245 function. The function is effective only when both
sides support early H.245.
-h450: Enable or disable H.450 related features, which include transfer, hold and forward.
Note:
It is not recommended to change the value in this command, only if users do know well the
application. This might cause incompatibility with other devices.
For example:
usr/config$ support -print
Special Voice function support manipulation
T.38(FAX) support
T.38(FAX) ECM
T.38(FAX) ASN.1
FAX redundancy depth : 0
FastStart support
Tunneling support
H.245 message after FastStart support : Enabled
EarlyH245 support
H450 support
usr/config$
24.7.16 [sysinfo]
This command could show up the line is busy or not.
usr/config$ sysinfo
System information
Index Reg. Status
=================
1 No Ready
FXS H.323 VoIP Gateway User Manual
: Disabled
: Disabled
: Disabled
: Enabled
: Disabled
: Disabled
: Disabled
Figure 24-33 support –print commend
- 117 -