Commands With Gateway - Dynamix DW1-FXS User Manual

Fxs gateway (h..323)
Table of Contents

Advertisement

Netmask 0xfffff800 Subnetmask 0xfffff800
Ethernet address is
Metric is 0
Maximum Transfer Unit size is 1500
0 octets received
0 octets sent
221 packets received
0 packets sent
221 unicast packets received
0 unicast packets sent
0 non-unicast packets received
0 non-unicast packets sent
0 input discards
0 input unknown protocols
0 input errors
138 output errors
0 collisions; 0 dropped
Step 4.
Set MAC Address:
usr/config$ setmac
- enter mac address (xxxxxxxxxxxx):
For example:
usr/config$ setmac
- enter mac address (xxxxxxxxxxxx):0001a8002743
- the mac address is 00 01 a8 00 27 43
- if mac address is correct,please press 'y' to
setup configuration,else press 'n' to continue
y
- mac address configuraton OK.
usr/config$
Step 5.
Set IP Address:
usr/config$ ifaddr –ip xxx.xxx.xxx.xxx –mask xxx.xxx.xxx.xxx –gate xxx.xxx.xxx.xxx
Step 6.
commit, reboot
usr/config$ commit
usr/config$ reboot

24.6 Commands with Gateway

The following table lists all of the commands that you can use with the Gateway. Refer to the
FXS H.323 VoIP Gateway User Manual
00:01:a8:00:27:43
- 92 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dw fxs-02Dw fxs-04

Table of Contents