Table of Contents
Advertisement
Gateway line information and configuration
Usage:
line [-config number [hunt number][hotline number][forward number]]
line -print
Gateway line information.
-config
Set Gateway line information.
Example:
line -config 1 hunt 1 hotline 1003 forward 1002
usr/config$
Parameter Usages:
-print: print out all current settings of line
-config: determine which line to configure
--hunt: Set hunting group flag of each line. User can assign different hunt group number
represent different hunt group.
--hotline: Set hotline table. The Hotline Mode is applied in limited two channels. User
just picks up the phone set of one FXS TEL or calls in one FXO line, and gateway
will automatically dial out a phone number. In the other hand, user will hear ring
back tone or dial tone immediately depended on configurations of destination
device.-forward: Set no answer forward table.
For example:
usr/config$ line -print
Line information and configuration
Index Type Hunt Hotline
========================================================
1
FXS 1
2
FXS 2
3
FXS 3
4
FXS 4
usr/config$
FXS H.323 VoIP Gateway User Manual
hunt: Hunting group.
hotline: Hot line configuration.
forward: No answer forward for FXS line.
Figure 24-24 line commend list
No Answer Forward Registration Status
x
x
x
x
x
x
x
x
Figure 24-25 line -print commend
No
Ready
No
Ready
No
Ready
No
Ready
- 108 -
Advertisement
Table of Contents
