12.1 Voice Configuration Overview
The web configuration provides Voice Configuration screen.
12.2 Voice Configuration Screen
Click [Voice Configuration] in the navigation panel and open the [Voice Configuration]
Screen.
The following table describes this screen.
LABEL
Codec Priority
Frame Size
Line1/
TEL1 Volume
FXS H.323 VoIP Gateway User Manual
This Chapter covers voice is associated with the audio setting information.
Figure 12-1 Voice Configuration
Table 12-1 Voice Configuration
Set priority preference of installed codes, G.723, G.711A, G.711U, G.729,
G.729A, G.729B, G.729AB.
Set Specify sending packet size, G.723: 30/60/90, G.711A, G.711U, G.729,
G.729A, G.729B, G.729AB: 20/40/60ms.
The smaller the packet size, the shorter the delay time. If network is in
good condition, smaller sending packet size is recommended.
Set voice volume stands for volume, which can be heard from VoIP
Gateway side (0~63, default: 28).
Voice Configuration Screen
DESCRIPTION
Chapter 12
- 53 -