Chapter 13 Phone Configuration Screen; Phone Configuration Overview; Phone Configuration Screen; Figure 13-1 Phone Configuration - Dynamix DW1-FXS User Manual

This Chapter covers VoIP Gateway progress tone is configurable. Default tone value is set
according to U.S. tone specification. Users may adjust the values according to their own

13.1 Phone Configuration Overview

The web configurator provides [Phone Configuration] screen.

13.2 Phone Configuration Screen

Click [Phone Configuration] in the navigation panel and open the [Phone Configuration]
Screen.
The following table describes this screen.
LABEL
Ring Cadence
Ring Back Tone
Busy Tone
Dial Tone
FXS H.323 VoIP Gateway User Manual
country's tone specification or users-defined tone specification.

Figure 13-1 Phone Configuration

Table 13-1 Phone Configuration

Setting the played tone type, when VoIP Gateway is receiving a call.
Setting the played tone type, when VoIP Gateway receives a Q.931
Alerting message. In condition that VoIP Gateway is the originate side.
Setting the played tone type, when destination is busy.
Setting the played tone type, when hook off a phone set of workable VoIP
Gateway.
Phone Configuration Screen
DESCRIPTION
Chapter 13
- 55 -