Figure 24-32 Support Commend List - Dynamix DW1-FXS User Manual

[-h450 used]
support -print Display support information and configuration.
-t38
-t38ecm
-t38asn1
-faxrdd
-fstart
-tunnel
-h245fs
-earlyh245 EarlyH245 support (0=Disabled, 1=Enabled).
-h450
Example:
support -t38 1
support -t38ecm 1
support -t38asn1 1
support -faxrdd 1
support -fstart 1
support -tunnel 1
support -h245fs 1
support -earlyh245 1
support -h450 1
usr/config$
Parameter Usages:
-print: print current settings in support command.
-t38: Enable or disable T.38 fax ability. The function is will automatically defer codec (G.723 or
G.729a) to T.38 when FAX signal is detected.
-t38ecm: Enable or disable t38ecm function. The function is support the error correction in the
high-speed fax mode.
-t38asn1: Enable or disable Enable ASN.1 function. The function is support with the FAX.
-faxrdd: Set fax redundancy depth. User can increase FAX redundancy depth when network
traffic is heavy. For example, if user set fax redundancy as 2, Gateway will resend fax
packets every 2 packets.
-fstart: Enable or disable fstartStart function. The function is can shorten the connection time if
the opposite party also supports fastStart.
FXS H.323 VoIP Gateway User Manual
T.38(FAX) (0=Disabled, 1=Enabled).
T.38(FAX) ECM (0=Disabled, 1=Enabled).
T.38(FAX) ASN.1 support (0=Disabled, 1=Enabled).
FAX redundancy depth (0 ~ 2).
Fast start (0=Disabled, 1=Enabled).
H245 Tunneling (0=Disabled, 1=Enabled).
H245 message after FastStart support (0=Disabled, 1=Enabled).
H450 support (0=Disabled, 1=Enabled).

Figure 24-32 support commend list

- 116 -