3.1 Behind IP-Sharing ..................... 26 3.1.1 IP Sharing Configuration..................26 3.1.1.1 One Dynamix DW-01Plus/S behind Dynamix DW-01Plus/S..... 26 3.1.1.2 More than one Dynamix DW-01Plus/S behind the same IP Sharing Device.......................... 29 3.2 NAT mode (PPPoE)....................31 3.3 Call Hold, Transfer and Forward................33 3.3.1 Call Hold –...
Page 3
3.3.2 Call Transfer – press [FLASH], then [transferring number] ......33 3.3.3 Call Forward:......................33 3.4 Upgrade Your Dynamix DW-01Plus/S ..............35 3.4.1 Upgrade via Web management interface............35 3.4.1.1 Before start..................... 35 3.4.1.2 Upgrade Version .................... 35 3.4.2 Upgrade via Telnet Command interface ............. 37 3.5 Dynamix DW-01Plus/S PSTN Line Application............
Page 4
Part V: Telnet Command Interface..................63 5.1 Login ..........................64 5.2 Save and Reboot......................64 5.3 System Commands Overview ................. 65 5.3.1 [help] ........................65 5.3.2 [quit] ........................66 5.3.3 [debug]........................66 5.3.4 [reboot]........................68 5.3.5 [commit] ......................... 68 5.3.6 [ifaddr] ........................69 5.3.7 [time] ........................
Dynamix DW-01Plus/S Gateway User Manual Part I: Dynamix DW-01Plus/S Gateway Overview This part introduces the software/hardware specifications and default settings of the Dynamix DW-01Plus/S. - 1 -...
Dynamix DW-01Plus/S Gateway User Manual 1.1 Overview The Dynamix DW-01Plus/S is a one-port telephone extension and three ports SOHO Router to IP network gateway. It provides Data transfer by 10/100Mbps, telephone services and T.38 fax over IP network with easily operation and configuration.
System Monitoring System status (WAN, LAN, TEL, Status, Power) Remote Firmware Upgrade You can use FTP/TFTP to perform firmware upgrade for the Dynamix DW-01Plus/S Gateway from a remote location. Security Password protection for system management ...
Power (Green): Light on: Dynamix DW-01Plus/S is connected with power adapter correctly and power on. Light off: Dynamix DW-01Plus/S is not connected with power adapter correctly or not power on. Status (Green): Light on: Dynamix DW-01Plus/S is under Proxy mode and successfully register to Proxy.
Page 9
TEL (Orange): Light Blinking: Dynamix DW-01Plus/S IP side has incoming call. Light On: Dynamix DW-01Plus/S IP side is in communication. Light Off: IP Line of Dynamix DW-01Plus/S is in standby mode. WAN/LAN (Green): Light on: Ethernet port successfully connected with network.
Page 10
RJ-11 connector, Dynamix DW-01Plus/S interface to connect analog phone sets or trunk port of PABX. PSTN Port: RJ-11 connector, Dynamix DW-01Plus/S interface to CO PSTN line or extension port of PABX. DC 12V Port: DC 12V Power supply.
Dynamix DW-01Plus/S Gateway User Manual Part II: Start-UP This part explains how to configure essential and basic items before user can run Dynamix DW-01Plus/S gateway. - 7 -...
2.1.2 Additional Installation Requirements In addition to the contents of your package, there are other hardware and software requirements you need before you can install and use your Dynamix DW-01Plus/S Gateway. These requirements include: 1. A computer with an Ethernet NIC (Network Interface Card) installed.
Ethernet port of your network (e.g. Cable Modem, ADSL Modem) using the standard CAT-5 straight Ethernet cable. Step 2. Connect your PC to the LAN port of Dynamix DW-01Plus/S Connect your PC to the LAN port of Dynamix DW-01Plus/S with standard CAT-5 straight Ethernet cable.
Display [Commit to Flash OK!], when Dynamix DW-01Plus/S finished committing data. Step 2. Click [Reboot System] on the navigation panel. In the Dynamix DW-01Plus/S Gateway screen, click the [Reboot] button. It will take around 40 seconds to reboot. - 10 -...
Page 15
Dynamix DW-01Plus/S Gateway User Manual Step 3. Close the current browser windows and launch your web browser again. - 11 -...
Dynamix DW-01Plus/S Gateway User Manual 2.1.3.2 Setup Network (1) Fixed IP To configure the VoIP Gateway IP address, please click [Network Interface] on the navigation panel. In the Network Interface screen, type a new IP address, subnet mask and the default routing gateway (e.g. IP Address: 192.168.0.188, Subnet mask: 255.255.255.0, Default routing gateway: 192.168.0.1) and click the OK...
Page 17
Dynamix DW-01Plus/S Gateway User Manual (2) DHCP Click [Network Interface] on the navigation panel. In the Network Interface screen, enable the DHCP function if you are using the cable modem or DHCP server and click the [OK] button. - 13 -...
Page 18
Dynamix DW-01Plus/S still can’t get contact with server, Dynamix DW-01Plus/S will keep trying to connect. After re-connected, Dynamix DW-01Plus/S will also restart system. On the other hand, if user disables this function, Dynamix DW-01Plus/S won’t reboot and keep trying to connect.
Dynamix DW-01Plus/S Gateway User Manual 2.1.3.3 Application mode-Proxy/Peer-to-Peer Mode After setting IP address, user must assign Dynamix DW-01Plus/S to work under Proxy mode or Peer-to-Peer mode. If there is no Gatekeeper, please set your Dynamix DW-01Plus/S as Peer-to-Peer Mode. 2.1.3.3.1 Proxy mode Proxy mode means that there will be an intermediate Proxy Server between Dynamix DW-01Plus/S Gateway and the remote entity.
Page 20
2.1.3.3.2 Peer-to-Peer Mode Peer-to-Peer Mode allows users to call other VoIP devices without the proxy server. When in Peer-To-Peer mode, Dynamix DW-01Plus/S Gateway use Phone Book, which will dial predefined phone number, and press “#” (optional, to accelerate the dial) as end of dial.
Page 21
Dynamix DW-01Plus/S Gateway User Manual Step 2. Configure Phone Book in the Dynamix DW-01Plus/S Gateway. Click [Phone Book] on the navigation panel. In the Phone Book screen, enter the Index, Name, IP address and e164 (phone number) of the destination and click the Add Data button.
[255.255.255.0], default router gateway as [192.168.1.254]. (2) DHCP usr/config$ ifaddr –dhcp 1 In this case is to enable DHCP mode of Dynamix DW-01Plus/S, once Dynamix DW-01Plus/S reboot system, it will automatically capture IP from DHCP server. (3) PPPoE Step 1. To Set PPPoE mode, please use [pppoe] command: usr/config$ pppoe –dve 1 (PPPoE used)
Page 23
: Yes usr/config$ Step 4. Commit and reboot Dynamix DW-01Plus/S. usr/config$ commit usr/config$ reboot Step 5. When Dynamix DW-01Plus/S successfully establish PPPoE connection, use command [pppoe -print] to see detail information. For example: usr/config$ pppoe -print PPPoE adapter information Device...
Dynamix DW-01Plus/S Gateway and the remote entity. While operating at this mode, Dynamix DW-01Plus/S Gateway will first register to the Proxy Server located at the ISP side. For the following operation, it sends the INVITE message to the Proxy Server once you initiate a session.
Page 25
2.1.4.3.2 Peer-to-Peer Mode Peer-to-Peer Mode allows users to call other VoIP devices without the proxy server. When in Peer-To-Peer mode, Dynamix DW-01Plus/S Gateway use Phone Book, which will dial predefined phone number, and press “#” (optional, to accelerate the dial) as end of dial.
Installation Wizard is a friendly software tool that can provide you an easy way to configure your Dynamix VoIP devices. You only need to Input the MAC address of your product and Click [Search Device]; you can configure your VoIP device without changing your PC’s setting.
Please follow procedures as below to change type you like. 2.1.1 Horizontal Type 2.1.1.1 Insert stand board on one side. 2.1.1.2 Insert the other stand board on the other side. 2.1.1.3 Finally Dynamix DW-01Plus/S can stand as horizontal type. - 23 -...
Dynamix DW-01Plus/S Gateway User Manual 2.1.2 Vertical Type 2.1.2.1 Insert stand board on one side. 2.1.2.2 Insert the other stand board on the same side. 2.1.2.3 Finally Dynamix DW-01Plus/S can stand as vertical type. - 24 -...
Dynamix DW-01Plus/S Gateway User Manual Part III: Special Applications Features This part explains how to configure Dynamix DW-01Plus/S Gateway under special application mode, such as behind NAT, and how to upgrade firmware. - 25 -...
Step 3. One can also assign a fixed IP address, which belongs to the same network segment as the LAN interface of IP Sharing device. Step 4. Dynamix DW-01Plus/S Gateway must enable the IP Sharing function for the fixed / dynamic WAN IP Address.
Page 31
DMZ Host IP: 192.168.1.5 Step 6. Configure the Dynamix DW-01Plus/S Gateway IP address for IP Sharing Mode. Click [Network Interface] on the navigation panel. In the Network Interface screen, enter the IP address, Subnet mask and the default gateway in the network table.
Page 32
Dynamix DW-01Plus/S Gateway User Manual Step 9. Click [Reboot System] on the navigation panel. In the VoIP Gateway screen, click the [Reboot] button. It will take around 40 seconds to reboot. Step 10. Close the current browser windows and launch your web browser again. Enter the new IP address in the Location or Address field.
Dynamix DW-01Plus/S Gateway User Manual 3.1.1.2 More than one Dynamix DW-01Plus/S behind the same IP Sharing Device Assign an IP address to each Dynamix DW-01Plus/S using fixed address. Enable the IP Sharing function for each set using following command. Fixed IP Address –...
Page 34
DMZ Host setting to enable the NAT traverse and disable the Port Forwarding. 4. If there are two or more sets of Dynamix DW-01Plus/S Gateway attached to the IP-Sharing device, please configure the Port Redirection (Forwarding) to enable the NAT traverse and disable the DMZ Host.
Dynamix DW-01Plus/S Gateway User Manual 3.2 NAT mode (PPPoE) Step 1. Set PPPoE mode, using [pppoe –dve 1], input the user id & password provided by your ISP, using [pppoe –id –pwd], reboot the device after disconnection, using [pppoe –reboot 1] usr/config$ pppoe –dve 1 (PPPoE used)
Page 36
LAN cannot have the same IP address. Set Default Gateway value as 192.168.123.123 in the [new gateway] field. Then save your change. PC can also use DHCP mode when DHCP server of Dynamix DW-01Plus/S is enabled.
The default FLASH length for Gateway is between 400ms to 800 ms.. This value must be compliant with your phone set, if user press flash but not work, please check the flash time value of your phone set and adjust it on Dynamix DW-01Plus/S. 3.3.1 Call Hold – press [FLASH] By pressing the FLASH after making a call, both sites shall hear the 2nd dial tone generated by Gateway.
Page 38
Dynamix DW-01Plus/S Gateway User Manual 3.3.3.2 Busy Forward: While line is engaged or phone set is been off-hook, incoming call will be forwarded to the assigned number. Activate: *76 [Forward No.] # Deactivate: #76# 3.3.3.3 Unconditional: Incoming call will be forwarded to the assigned number unconditionally.
Book]. 3.4.1.2 Upgrade Version Step 1. To update the Dynamix DW-01Plus/S Gateway ROM Version, please click [ROM Upgrade] on the navigation panel. In the [ROM Configuration] screen, type TFTP/FTP Server IP address, Target File Name, Method, Target File Type (e.g.
Page 40
Dynamix DW-01Plus/S Gateway User Manual Step 2. After upgrade finished, on screen will display [Please issue FLASH CLEAN to consist software version.] information. Step 3. Click [Flash Clean] on the navigation panel. In the Flash Clean screen, click the [CLEAN] button.
Dynamix DW-01Plus/S Gateway User Manual Step 5. Click [Reboot System] on the navigation panel. In the Reboot Dynamix DW-01Plus/S Gateway screen, click the [Reboot] button. It will take 40 seconds to reboot. Step 6. Close the current browser windows and launch your web browser again. Enter the IP address in the Location or Address field.
Page 42
Dynamix DW-01Plus/S Gateway User Manual Parameter Usages: -print: show versions of all rom files. -app, boot, boot2m, dsptest, dspcore, dspapp, ht: To update main Application program code, Boot code, DSP testing code, DSP kernel code, or DSP application code, and Hold Tone file.
3.5.2 PSTN Incoming Call 3.5.2.1 VoIP TEL is busy Caller from PSTN side can still make a call to Dynamix DW-01Plus/S, PSTN LED will be blanking, when user hangs up IP call, TEL phone set will ring, and user can pick up the call from PSTN side.
Dynamix DW-01Plus/S Gateway User Manual 3.6 Hotline mode The Hotline Mode is applied in limited two peers. User just picks up the phone set and then hears ring back tone or dial tone depended on configurations of destination device. Step 1. Specify gateway service type as Hotline service.
Dynamix DW-01Plus/S Gateway User Manual Part IV: Web Management Interface This part explains how to configure the Dynamix DW-01Plus/S Gateway via WEB management interface. - 41 -...
Dynamix DW-01Plus/S Gateway User Manual 4.1 Login and welcome screen Step 1. Start your web browser. Step 2. Launch your web browser and enter [192.168.123.123] (the default IP address of the LAN port) in the Location or Address field. Press Enter.
Click OK at the end of every configuration page to confirm your changes. All configurations will not take effect before reboot system. Please remember to do [Commit Data] to save all configuration then [Reboot System] to reboot Dynamix DW-01Plus/S. - 43 -...
SNTP Server Address: Set SNTP Server Address When SNTP server is available, enable Dynamix DW-01Plus/S SNTP function to point to SNTP server IP address so that Dynamix DW-01Plus/S can get correct current time. GMT: Set time zone for SNTP Server time User can set different time zone according to the location of Dynamix DW-01Plus/S.
Page 49
Note: When Dynamix DW-01Plus/S is behind IP sharing device, if Proxy support behind NAT function, both Dynamix DW-01Plus/S and IP sharing don’t need to do any configuration. Please contact with your proxy vendor more correct information before configuring Dynamix DW-01Plus/S.
Set secondary Proxy IP Address or URL address (Domain Name Server must be configured. Please refer to Network Interface). When Dynamix DW-01Plus/S fail to register to primary Proxy, it will try to register to secondary Proxy, when it fails again, it will retry to register to Primary Proxy.
Page 51
Dynamix DW-01Plus/S Gateway User Manual prefix as abc, Dynamix DW-01Plus/S will set out as abc123@”IP address of Proxy”. This function is for special proxy server. Line Number: identify one number for the Dynamix DW-01Plus/S to register to the Proxy. Line Account: set user name of Dynamix DW-01Plus/S for registering.
To set the duration (in second) of two pressed digits in dial mode as timed out. If after the duration user hasn’t pressed next number, Dynamix DW-01Plus/S will dial out all number pressed (The inter digit time range is 1~10 secends).
Dynamix DW-01Plus/S still can’t get contact with server, Dynamix DW-01Plus/S will keep trying to connect. After re-connected, Dynamix DW-01Plus/S will also restart system. On the other hand, if user disables this function, Dynamix DW-01Plus/S won’t reboot and keep trying to connect.
Dynamix DW-01Plus/S Gateway User Manual 4.3.5 Voice Configuration Screen Click [Voice Configuration] in the navigation panel and open the [Voice Configuration] Screen. Codec Priority: set codecs priority in order. Please notice that user can set from 1 to 5 codecs as their need. For example, user can only set first priority as G.723.1, and set the others as x, that means only G.723.1 is available.
4.3.6 Phone Configuration Screen Click [Phone Configuration] in the navigation panel and open the [Phone Configuration] Screen. For tone simulation, Dynamix DW-01Plus/S Gateway adopts dual frequencies as traditional telephone does. If users want to have their own call progress tone, they can change the value of tones.
Page 56
Dynamix DW-01Plus/S Gateway User Manual Low(lev) : Level (volume) of Low frequency High(lev) : Level (volume) of High frequency On1 : On cadence of first cycle Off1 : Off cadence of first cycle On2 : On cadence of second cycle ...
Dynamix DW-01Plus/S Gateway User Manual 4.3.7 Support Configuration Screen Click [Support configuration] in the navigation panel and open the [Support Configuration] Screen. T.38 FAX: enable/disable FAX function. If user wants to fax with Dynamix DW-01Plus/S gateway, this function must be enabled. - 53 -...
Dynamix DW-01Plus/S Gateway User Manual 4.3.8 Phone Book Configuration Click [Phone Book Configuration] in the navigation panel and open the [Phone Book] Screen. Add Data: User can specify 10 sets of phone book via Web Management Interface. Please input index, Name, IP Address and E.164 number of the destination device.
Dynamix DW-01Plus/S Gateway User Manual 4.3.9 Prefix Configuration Screen Click [Prefix configuration] in the navigation panel and open the [Prefix Drop/Insert Configuration] Screen. Index: Setting the index number for prefix record (max 30 record). Prefix: Setting the prefix number of the whole numbers that could be into this VoIP gateway (1~20 digits).
Dynamix DW-01Plus/S Gateway User Manual 4.3.10 DSCP Configuration Screen Click DSCP Configuration in the navigation panel and open the DSCP Configuration Screen. Set Signal or RTP Packet DSCP value: Assured Forwarding (AF) PHB: Select Delay priority and Drop Precedence Expedited Forwarding (EF) PHB:...
Page 61
Dynamix DW-01Plus/S Gateway User Manual DROP Precedence Class #1 Class #2 Class #3 Class #4 Low Drop Precedence (AF11) (AF21) (AF31) (AF41) 001010 010010 011010 100010 Medium Drop Precedence (AF12) (AF22) (AF32) (AF42) 001100 010100 011100 100100 High Drop Precedence...
Dynamix DW-01Plus/S Gateway User Manual 4.3.10 Password Configuration Screen Click [Password configuration] in the navigation panel to open the [Password Configuration] screen. It is highly recommended that you change the default password ([Null]). Change: First select login name as root or administrator, then enter current password, new password and confirm new password again to set new password.
FTP Login: Set FTP login name and password Target File Type: Select which sector of Dynamix DW-01Plus/S to upgrade Note: After upgrading 2mb file or Application, please remember to execute Flash Clean, which will clean all configurations become factory values except IP address.
4.3.12 Flash Clean Screen Click [Flash Clean] in the navigation panel and open the [Flash Clean] Screen. Press CLEAN will clean all configurations of Dynamix DW-01Plus/S and reset to factory default value. Note: User must re-configure all commands all over again (except Network Configure)
Dynamix DW-01Plus/S Gateway User Manual 4.3.13 Commit Configuration Data Screen Click [Commit Data] in the navigation panel and open the [Commit Configuration Data] Screen. Commit Date to save all configurations. Please remember to commit data before reboot your Dynamix DW-01Plus/S.
Dynamix DW-01Plus/S Gateway User Manual 4.3.14 Reboot Dynamix DW-01Plus/S System screen Click [Reboot System] in the navigation panel and open the [Reboot Dynamix DW-01Plus/S Gateway] Screen. Press reboot will reset Dynamix DW-01Plus/S. Note: To execute reboot, please remember to do Commit Data before Reboot System.
Dynamix DW-01Plus/S Gateway User Manual Part V: Telnet Command Interface This part gives information on how to configure Dynamix DW-01Plus/S gateway via Telnet command line interface. - 63 -...
Dynamix DW-01Plus/S Gateway User Manual 5.1 Login For you first login, enter the login: [root] and default no password. login: root password: Welcome to Terminal Configuration Mode Please enter your configuration item usr/config$ Note: Login account [root] or [administrator] is the default login account and there is no password needed.
5.3 System Commands Overview 5.3.1 [help] Press help/man/ ? will display all command list of Dynamix DW-01Plus/S. The following table lists all of the commands that you can use with the Gateway. Refer to the following chapters for descriptions of commonly used commands.
Dynamix DW-01Plus/S Gateway User Manual Command DESCRIPTION prefix Prefix drop/insert information manipulation 5.3.2 [quit] Type [quit] will quit the Gateway configuration mode. And turn back to login prompt. usr/config$ quit Disconnecting.. login: root Welcome to Terminal Configuration Mode Please enter your configuration item...
Page 71
Dynamix DW-01Plus/S Gateway User Manual Parameter Usages: -status: Display the enabled debug flags. -add: Add debug flag. -- sip: sip related information -- msg: voice related information -delete: Remove specified debug flag. -open: Start to show debug messages. -close: Stop showing debug messages.
Dynamix DW-01Plus/S Gateway User Manual 5.3.4 [reboot] After [commit], type [reboot] to reload Gateway in new configuration. The procedure is as below: usr/config$ reboot Start to Unregister ... Unregister complete..Rebooting...It will take 40 seconds..Attached TCP/IP interface to cpm unit 0 Attaching interface lo0...done...
Dynamix DW-01Plus/S Gateway User Manual 5.3.6 [ifaddr] Configure and display Gateway network information. usr/config$ ifaddr LAN information and configuration Usage: ifaddr [-print]|[-dhcp used]|[-sntp mode [server]] ifaddr [-ip ipaddress] [-mask subnetmask] [-gate defaultgateway] ifaddr [-dns index [dns server address]] [-ipsharing used[ip address]]...
Page 74
-ipsharing: To enable or disable IP sharing function. When this function is enabled, user must specify a public fixed IP address. usr/config$ ifaddr -ipsharing 1 210.11.22.33 Note: If the public IP address is not a fixed one, Dynamix DW-01Plus/S cannot work behind NAT with peer-to-peer mode. - 70 -...
Dynamix DW-01Plus/S Gateway User Manual -server: set EMS server IP address. EMS is software to help user can easily configure products. Please contact with your reseller for more information. -id: specify EMS ID to login EMS Server. -pwd: specify EMS password to login EMS Server.
Dynamix DW-01Plus/S Gateway User Manual 5.3.8 [ping] Use [ping] to test whether a specific IP is reachable or not. For example: if 192.168.1.2 is not existing while 210.63.15.32 exists. Users will have the following results: usr/config$ ping 192.168.1.2 no answer from 192.168.1.2 usr/config$ ping192.168.1.254...
Page 77
Dynamix DW-01Plus/S Gateway User Manual -print Display phonebook data. -add Add an record to phonebook. -search Search an record in phonebook. -delete Delete an record from phonebook. -insert Insert an record to phonebook in specified position. -modify Modify an exist record.
Dynamix DW-01Plus/S Gateway User Manual --port: Call signal port number of caller --drop : Drop e.164 number when dial out. 0 means to keep e.164 number, 1 means to drop e.164 number when dialing out. --inert: Insert digits.(1~10 digits) usr/config$ pbook –add name test e164 100 ip 192.168.13.78 -modify: modify an existing record.
Page 80
Dynamix DW-01Plus/S Gateway User Manual Note: This command will clean the configuration stored in the flash and reboot it. usr/config$ Parameter Usages: -clean: clean all the user defined value, and reboot Gateway in factory default mode. Note: 1. It is recommended to execute [flash –clean] after application firmware been upgraded.
Dynamix DW-01Plus/S Gateway User Manual 5.3.12 [sysconf] This command displays system information and configurations. usr/config$ sysconf System information and configuration Usage: sysconf [-print] [-idtime digit] [-bf digit] [-keypad dtmf] [-faxtype type][-2833type type][-lcdrop ON/OFF] [-droptime digit][-eod digit] [-callerid type] [-service used][-dtmfstart digits] [-dtmfend digits]...
Page 82
-service: set SIP Phone to be normal mode or under hotline mode. (sysconf –service 0/1, 0 for normal service, 1 for hotline service.) -keypad: DTMF replay type. When value is “1”, Dynamix DW-01Plus/S Gateway will transfer DTMF signal via RTP payload as defined in RFC2833. When the value is set to “0”, the DTMF type is set as In-band, and 2 for SIP info DTMF.
-mode: Configure as Proxy mode or Peer-to-Peer mode (0: Peer-to-Peer mode, 1: Proxy mode). -px: to specify Proxy address when Dynamix DW-01Plus/S Gateway is in proxy mode. Proxy address can be IPv4 address or DNS name. -px2: to setting Secondary Proxy server address. Proxy address can be IPv4 address or DNS name.
Page 84
Dynamix DW-01Plus/S will search dialed number in phone book to see if there is any matched table before send to Proxy server, and if there is a matched data in phone book, Dynamix DW-01Plus/S will make call to related IP address.
Dynamix DW-01Plus/S Gateway User Manual -name: Specify the username of your account information. -pwd: Specify the password of your account information. For example: usr/config$ security -print Line1 account information Username : 1001 Password : *** usr/config$ 5.3.15 [voice] The voice command is associated with the audio setting information. There are four voice codecs supported by Gateway.
Page 87
Dynamix DW-01Plus/S Gateway User Manual dtmf volume (0~31, default: 23), -nscng No sound compression and CNG. (G.723.1 only, On=1, Off=0). -echo Setting of echo canceller. (On=1, Off=0, per port basis). -mindelay Setting of jitter buffer min delay. (0~150, default: 90).
Dynamix DW-01Plus/S Gateway User Manual Note: Be sure to know well the application before you change voice parameters because this might cause incompatibility. For example: usr/config$ voice -print Voice codec setting relate information Sending packet size : G.729A : 40 ms G.723.1...
Page 89
Dynamix DW-01Plus/S Gateway User Manual support -print -t38 T.38(FAX) enabled/disabled. -busy Busy Forward number.(if empty, please fill "null") -noanswer No Anser Forward number.(if empty, please fill "null") -uncon Unconditional Forward number.(if empty, please fill "null") Example: support -t38 1 support -busy 1001...
Dynamix DW-01Plus/S Gateway User Manual 5.3.17 [tos] This command is for setting Differentiated Service Code Point configuration. usr/config$ tos IP Packet ToS(type of Service)/Differentiated Service configuration Usage: tos [-rtptype dscp] tos [-sigtype dscp] tos -print [-rtpreliab mode] tos -print Example:...
Page 91
Dynamix DW-01Plus/S Gateway User Manual tone specification or users-defined tone specification. usr/config$ phone Phone ringing , ringback tone , busy tone , dial tone setting and notes Usage: phone [-ring [freq ] [ringON ] [ringOFF ] [ringLevel]] [-rbt [freqHi ] [freqLo ] [freqHiLev] [freqLoLev]...
Page 93
Dynamix DW-01Plus/S Gateway User Manual Ringback Tone tone2 off : 4000 usr/config$ usr/config$ phone -print rbt Phone ring back tone paramter Ringback Tone frequency high : 440 Ringback Tone frequency low : 480 Ringback Tone frequency high level : 13...
Dynamix DW-01Plus/S Gateway User Manual Dial Tone frequency low level : 155 Dial Tone tone1 on : 8000 Dial Tone tone1 off Dial Tone tone2 on : 8000 Dial Tone tone2 off usr/config$ usr/config$ usr/config$ phone -print flash Phone flash paramter...
Dynamix DW-01Plus/S Gateway User Manual -hotline: Define Line1 Hotline table respectively. The table is included [Line number], [destination IP Address] and [destination Port or Number]. For example 1. Destination is a FXS device, 628 is its Line1 number usr/config$ bureau -hotline 1 200.168.4.69 628 User picks up the Line1, and then hears the ring back tone generated from destination.
Page 96
Dynamix DW-01Plus/S Gateway User Manual -dspapp update DSP application code(optional) IP address of TFTP/FTP server (mandatory) file name(mandatory) -method download via TFTP/FTP (TFTP: mode=0, FTP: mode=1) -ftp specify username and password for FTP -server specify EMS Server IP address Note: This command can run select one option in 'app', 'boot', , 'dsptest', 'dspcore', and 'dspapp'.
Page 97
Dynamix DW-01Plus/S Gateway User Manual Application Rom : 1asip.107 DSP App : 48302ce3.140 DSP Kernel : 48302ck.140 DSP Test Code : 483cbit.bin Hold Tone : holdtone.101 usr/config$ 5.3.21 [auth] For security concern, the “root” user can customize some configurable items for “administrator”...
Dynamix DW-01Plus/S Gateway User Manual Note: Gateway Login name only use [root] or [administrator]. [root] and [administrator] have the same authorization, except commands that can be excuted by [Login name: root] only [passwd –set root], [rom –boot], [room-boot2m] and [flash –clean].
Page 100
Dynamix DW-01Plus/S Gateway User Manual prefix -delete 1 prefix -modify 1 prefix 100 drop 0 insert 300 usr/config$ Parameter Usages: -add: Add a rule to drop or insert prefix digits of incoming call. --prefix: Set which prefix number to implement prefix rule.