Saving Your Configuration - Dynamix DW1-FXS User Manual

LABEL
H323 Information
Line Status
Phone Book
Support Configuration This link takes you to a screen where you can set up Support Functions
System Configuration This link takes you to a screen where you can set up System Configuration.
Voice Setting
Phone Configuration This link takes you to a screen. When will set phone patterns of the VoIP
RTP Payload Type
configuration
IP Packet ToS
DDNS Configuration This link takes you to a screen. When will use DDNS of the VoIP Gateway.
Prefix Configuration This link takes you to a screen. When will set prefix number of the VoIP
Version and
Information
Password
ROM Upgrade
Flash Clean
Commit Data
Reboot System
FXSO Gateway Only FXO Gateway special setting. Only use FXO port can set.
Route Table
Tone Configuration
FXO Password
2.5

Saving Your Configuration

Click OK to save your changes back to the VoIP Gateway volatile memory. The VoIP
FXS H.323 VoIP Gateway User Manual
This link takes you to a screen where you can setup up H323 Information.
This link takes you to a screen. When will set hotline, no answer forward;
understand Line registration and use status of the VoIP Gateway.
This link takes you to a screen where you can set up Phone Book
Information.
Configuration.
This link takes you to a screen where you can set up Voice Configuration.
Gateway.
This link takes you to a screen. When will set RTP Payload Type patterns
of the VoIP Gateway.
This link takes you to a screen. When will set IP Pack ToS of the VoIP
Gateway.
Gateway.
This link takes you to a screen. When will understand Version and
Information of the VoIP Gateway.
This link takes you to a screen. When will change passwords.
This link takes you to a screen. When will change ROM Upgrade
configuration.
This link takes you to a screen. When will clean flash memory information
back to factory setting.
This link takes you to a screen. When will save your changes to the
non-volatile memory.
This link takes you to a screen. When will reboot VoIP Gateway.
This link takes you to a screen. When will set Routing Table is a rule to
define the destination of the calls you make
This link takes you to a screen. When will set Tone pattern
only).
This link takes you to a screen. When will set use FXO password
Gateway only).
DESCRIPTION
(FXO Gateway only).
(FXO Gateway
(FXO
- 15 -