Using The X And Y Forms Adjust - Intermec 4630 User Manual

8. If the labels are too dark or too light, repeat this procedure until you get the

Using the X and Y Forms Adjust

If the print on your labels is not positioned correctly, you can center the printed
image with the X and Y Forms Adjust commands. The X Forms Adjust lets you
adjust the position of the printed image in the direction of media movement
(moves the print further towards the front or back of the label). The Y Forms
Adjust lets you adjust the position of the print in the direction parallel to the
front of the printhead (moves the print towards the sides of the label). You can
use X and Y Forms Adjust commands when the printer is online or offline.
You can adjust the print alignment on your labels without interrupting normal
label production. The following example uses the X Forms Adjust command.
The procedure is performed similarly for the Y Forms Adjust command.
Note: The x-dimension is also affected by the Top-of-Form configuration command.
For more information, see "Top of Form, Set" in Chapter 6.
results you want.
Note: The human eye generally likes darker print than what is required for a good
scan.
-X +X
Operating and Configuring the Printer
-Y
+Y
2
2-11