Intermec 4630 User Manual page 165

3
Field 1 2
In this example, the country code is left out, with the delimiting carat inserted.
The printer firmware fills in the default value of 840 (USA).
Printing Mode 2 and Mode 3 Compatible Bar Codes
IPL does not currently support Maxicode Modes 2 and 3; however, you can
print a Mode 2 and 3 compatible bar code. The sample data format shown
below prints a Mode 2 and 3 bar code on a printer that supports Maxicode
Mode 2 and 3.
You must restructure the data to print a Mode 2 and 3 compatible bar code on
the 4630 and 4830 printers:
The data fields in the sample format are described below:
Characters
Field Allowed
1 5
2 4
3 3
4 3
5 9
6 75
7 1
Program Mode Commands
5
Field Description
ZIP code
ZIP code extension
Service class
Country code
Header
Message
Data terminator
4630U-37
Default
None
None
999
840 (U.S.)
None
None
D
6
6-49