Graphic, Select Type
Selects a graphic for graphic fields.
Purpose:
Syntax:
c n
Values for n can range between 0 and 99.
n = 0
Default:
Notes:
This command applies to graphic fields only.
Graphic or UDC, Define
Purpose:
Maps one column of bitmap for a graphic or a font character. n is the column to
be mapped.
Syntax:
u n,m...m
n values can range between 0 and 599.
Notes:
Each data byte m represents 6 bits of the bitmap. See Chapter 5 for an example.
Height Magnification, Define
Defines box, bar code, or character height magnification. For bar code and box
Purpose:
fields, the height n is defined in number of dot increments.
Syntax:
h n
n values can range between 1 and 250 for human-readable fields and graphics.
For bar code and box fields, the range for n is from 1 to 9999.
Default:
n = 50
n = 100
n = 2
n = 1
For human-readable fields, graphics, and the POSTNET symbology, n
Notes:
represents the vertical magnification of the character bitmap.
Bar code height
Box height
POSTNET and human-readable fields
Graphics
Program Mode Commands
6
6-59