Point Size, Set; Program Mode, Exit; User-Defined Character, Clear/Create; User-Defined Character Field, Create/Edit - Intermec 4630 User Manual

4630 and 4830 Bar Code Label Printers User's Manual

Point Size, Set

This command sets the point size, which defines the size of the characters in
Purpose:
human-readable fields.
Syntax:
k n
n values can range between 4 and 212.
Default: n = 12
Notes: This command works most effectively on scalable fonts c25, c26, and c27.

Program Mode, Exit

Purpose: Instructs the printer to exit Program mode and enter Print mode. Any format
or page currently being edited is saved.
Syntax:
R

User-Defined Character, Clear/Create

Purpose: This command clears or creates a graphic bit map.
Syntax:
G n [, name ]
n values can range between 0 and 99.
,name is an optional field. The field can be up to eight ASCII characters (not
counting the semicolon) and cannot start with a numeric character.
If graphic n has already been defined, it is erased and redefined.
Notes:

User-Defined Character Field, Create/Edit

Purpose: Use this command to edit or create a graphic field n.
Syntax:
U n [, name ]
n values can range between 1 and 199.
,name is an optional field. The field can be up to eight ASCII characters (not
counting the semicolon) and cannot start with a numeric character.
Default: n = 0
6-64