Intermec 4630 User Manual page 91

*1233*
FG 9pt Italic
3. Convert the measurements for the human-readable field from inches to
dots. Use this equation:
1 inch (25.4 mm) = 300 dots
1 mm = 16 dots
In this example, the human-readable field origin in dots is:
0.5 inch x 300 dots = 150 dots (X dimension)
0.25 inch x 300 dots = 75 dots (Y dimension)
The origin for the human-readable field is o150,75 (oX,Y).
4. Convert the measurements for the line field and the bar code field to
complete this example.
To create or program the label format
1. Choose a bar code symbology and a human-readable font that suit your
needs.
For this example, you are going to use the proportional outline font and the
Code One symbology. See Chapter 6, "Intermec Printer Language
Commands," for information on the different symbologies and fonts
available to you.
2. Define the parameters for each type of field in the format.
This Type of Field
Human-readable (text)
Bar code
Line
Box
User-defined characters (UDCs) or graphics
See "Listing Printer Commands by Function" in Chapter 6 for a list of the
parameters you can define for each type of field.
Designing Labels Using IPL Commands
Is Represented By
H
B
L
W
U
5
5-5