Preparing The Receiver Printer; Preparing The Sender Printer And Downloading Data - Intermec 4630 User Manual

4630 and 4830 Bar Code Label Printers User's Manual

Preparing the Receiver Printer

Note: Cloning will erase any data stored in the receiver printer.
1. From the OFFLINE READY display, press Menu and then press ↑ or ↓
2. Press Select and then press ↑ or ↓ until the display shows:
3. Press Select and then press ↑ or ↓ until the display shows:
4. Press Enter. The print is ready to receive data.

Preparing the Sender Printer and Downloading Data

1. Connect the main serial ports of the sender and the receiver printers with
2. From the OFFLINE READY display of the sender printer, press Menu and
3. Press Select and then press ↑ or ↓ until the display shows:
4. Press Select and then press ↑ or ↓ until the display shows:
5. Press Select. The display shows:
6. Press Enter to download the RAM contents to the receiver printer. During
7-4
until you reach the Service menu.
SERVICE MENU
CLONING
CLONING
RECEIVER
an RS-232 null modem serial cable (Intermec P/N 049353).
then press ↑ or ↓ until you reach the Service menu.
SERVICE MENU
CLONING
CLONING
SENDER
SENDER
EXECUTE TEST
The sender printer is ready to download data to the receiver printer.
downloading, the display shows:
TRANSFERRING
When the downloading process is complete, the sender printer display
shows:
SENDER
EXECUTE TEST