Field Origin, Define; Font, Select Type; Font Character Width, Define - Intermec 4630 User Manual

4630 and 4830 Bar Code Label Printers User's Manual

Field Origin, Define

Defines the origin for a field. The field origin is the upper left corner of the
Purpose:
field. Horizontal n and vertical m locations represent the number of dot
increments from the label's origin. The origin (0,0) is the upper left square on
the label.
Syntax:
o n , m
n values can range between 1 and 19999
m values can range between 1 and 19999.
Default: n = 0
m = 0

Font, Select Type

Purpose: Selects a font type for human-readable fields.
Syntax:
c n [, m1 ]
For human-readable fields, n values can range between 0 and 41.
Default: n = 0
Notes: Modifiers apply only to bar code symbologies. Fonts and bar codes are listed at
the end of the Program mode command descriptions.

Font Character Width, Define

Defines the amount of space from the origin of one letter to the origin of the
Purpose:
next. If n is too small, characters may overlap.
Syntax:
Z n
n values can range between 0 and 599.
Default: Character bitmap width, minus the font character offset (Xn) plus the
intercharacter space (zn).
Notes: For bitmap characters only.
6-56