Intermec 4630 User Manual page 49

2
Operating and Configuring the Printer
When changing to media that has a different thickness, it may also be
necessary to reset the cam adjustment bracket.
To reset the cam adjustment bracket
1. Pull out on the adjustment knob and turn it counterclockwise until it stops.
2. Loosen the two screws securing the bracket.
3. Load the new media.
4. Slide the bracket up or down to contact the cam adjustment.
5. Tighten the two screws to secure the bracket.
6. Print a test label. You may need to turn the cam adjustment knob to fine
tune the print quality.
2-15