Intermec 4630 User Manual page 114

4630 and 4830 Bar Code Label Printers User's Manual
<STX>B8;o616,72;f3;c12,6,1,0;w4;h12;d3,Diamond Corp.*25cm White Tubing*Part
00914001*Bin 462*Inspector GLP*Price #3.10;<ETX>
<STX>E2;F2;<ETX>
<STX>H9;o254,54;f3;c25;h20;w20;d3,#3.10;<ETX>
<STX>E3;F3;<ETX>
<STX>H10;o240,402;f3;c25;h16;w13;d3,Inspected by:;<ETX>
<STX>H11;o166,474;f3;c25;h22;w22;d3,GLP;<ETX>
<STX>E4;F4;<ETX>
<STX>H12;o116,44;f3;c25;h8;w8;f3;d3,Part 009140001;<ETX>
<STX>H13;o78,44;f3;c25;h8;w8;f3;d3,Bin 462;<ETX>
<STX>H14;o42,44;f3;c25;h8;w8;f3;d3,Vendor 9578<ETX>
<STX>E5;F5;<ETX>
<STX>B15;o434,72;f3;c12,6,1,0;w4;h12;d3,Diamond Corp.*25cm White Tubing*Part
00914001*Bin 462*Inspector GLP*Price #3.10;<ETX>
<STX>s1;S1<ETX>
<STX>Ma,1;Mb,2;Mc,3;Md,4;Me,5;<ETX>
<STX>R<ETX>
Label Data
<STX><SI>l4<ESC>G1<ETX>
<STX><ETB><ETX>
Use the <ETX> and <STX> characters to mark the beginnings and ends of the
command strings. The following table explains the other characters. Most of
the printer command lines explained in the following table are those that
contain commands previously not discussed in this chapter. Refer to previous
examples for clarification of the lines that this example does not explain or see
Chapter 6, "Intermec Printer Language Commands," for a further explanation
of the command language.
Command
<ESC>P
E1;F1;
H0;
f3;
5-28
Description
Selects Program mode.
Erases anything previously stored as format one and accesses the location
for format one.
Defines field 0 as a human-readable field.
Rotates field 0 by 270 degrees counterclockwise around the origin.