Using The Menu Panel; About The Printer Menus - Intermec 4630 User Manual

Using the Menu Panel

The menu panel is located below the control panel
and behind the menu panel access door. Press and
release the access door to open it.
You use the menu panel keys to change printer
parameters and to setup security levels.
Select Selects menus and features, and returns to
the last adjustment display after you have left the
menus. This key also selects digits when changing
numerical parameters.
Enter Activates a selected option and starts a
selected Test or Service function.
Menu Returns to the menu list.
Cont Exits the menus.
↑ ↑ and ↓ ↓ Scrolls through menus and commands and increases or decreases
command settings.

About the Printer Menus

The printer has four menus. The following table will help you to locate the
menu you want to use, based on the tasks you are performing with the printer.
Menu Description
Operator Used for making fine adjustments to the
darkness, print alignment, and cutoff
point of your labels. This menu can be
accessed when the printer is online or
offline.
Install Select communication parameters and
security levels and install printer options.
The printer must be offline to access this
menu.
Service Set and adjust operating features, calibrate
printer sensors, and test current settings.
The printer must be offline to access this
menu.
Configuration Change the operating parameters and
activate or disable optional features. The
printer must be offline to access this
menu.
Operating and Configuring the Printer
User
Operators using the printer daily.
Programmers, systems analysts, or
other personnel who install and set
up the printer
Technicians or other personnel
qualified to do repair and service.
Programmers, systems analysts, or
supervisors who program and set up
printer commands and label formats.
2
4630U-09
2-5