Before You Begin; Safety Information; Do Not Repair Or Adjust Alone; First Aid - Intermec EasyCoder PM4i User Manual

Before You Begin

Before You Begin

Safety Information

xii
This section provides you with safety information, technical
support information, and sources for additional product
information.
Your safety is extremely important. Read and follow all warnings
and cautions in this document before handling and operating
Intermec equipment. You can be seriously injured, and
equipment and data can be damaged if you do not follow the
safety warnings and cautions.

Do not repair or adjust alone

Do not repair or adjust energized equipment alone under any
circumstances. Someone capable of providing first aid must
always be presentfor your safety.

First aid

Always obtain first aid or medical attention immediately after an
injury. Never neglect an injury, no matter how slight it seems.

Resuscitation

Begin resuscitation immediately if someone is injured and stops
breathing. Any delay could result in death. To work on or near
high voltage, you should be familiar with approved industrial first
aid methods.

Energized equipment

Never work on energized equipment unless authorized by a
responsible authority. Energized electrical equipment is
dangerous. Electrical shock from energized equipment can cause
death. If you must perform authorized emergency work on
energized equipment, be sure that you comply strictly with
approved safety regulations.
EasyCoder PM4i Printer User's Guide (Fingerprint Version)