Table of Contents
Advertisement
Checks and Preparation
Connecting to a DC Power Supply
Use the optional DC drive cable (B-514).
CAUTION
Use a power supply within the 8.5 to 24 VDC range.
(1) Configure the tip of the DC drive cable (B-514: 2m) to enable it to be connected to the DC
power supply.
(2) Connect the DC output side to the power supply connector on the GL450.
(3) Connect the DC input side to the DC power supply.
(4) Press the power switch on the GL450 to the ON side to turn on the power.
2-8
CAUTION
Be sure to check the polarity of the wire tips when performing wiring.
B-514
8 to 24 VDC power supply
Shielded lead (– side)
White (+ side)
Advertisement
Table of Contents
