Table of Contents
Advertisement
Software
Scaling
Use the Scaling function to perform calculation functions on the measured values and the scaling
values.
(1) Select CH
Specify a group or groups of channels in the range [1 to 10] through [91 to 100].
Meas. Output
• Function: Off, On
• Upper: Displays the Upper Limit Value of the set span.
• Lower: Displays the Lower Limit Value of the set span.
• Unit: Displays the unit for the set range. (Display only)
Scaling Output
• Sets the converted numerals and unit when the measured values are scaled.
• Upper: Sets the Upper Limit Value to be converted.
• Lower: Sets the Lower Limit Value to be converted.
• Unit: Input the unit for conversion.
(2) Pulse settings
Device number: Specify a Device Number from 1 to 10.
Function: Off, On
• Select On to enable scaling.
• Upper: Sets the Upper Limit Value.
• Unit: Sets the unit.
Scaling Output
• Upper: Sets the Upper Limit Value to be converted.
• Unit: Input the unit for conversion.
4-20
Advertisement
Table of Contents
