GRAPHTEC GL450 User Manual page 49

Settings and Measurement
e e e e e DATA Settings Window
Data capture, Data replay, and Statistical Calculation settings are made here.
DATA Menu Structure
Setting
Record Settings
• Sampling Interval
Capture Destination Memory, PC Card
File Name
Auto Save
Statistical Calculation Off, Average, Max, Min, Peak, RMS
• Function
Calculation channel Select the number of channels from the input terminal unit: ENTER→Select→ENTER
specification
Record Settings
Detailed settings for data capture are performed in this section.
Sampling Interval ................ Specifies the sampling interval for data capture. 16 intervals are
Capture Destination ............ Selects the destination for saving measured data.
3-14
Selections available
100, 200, 500ms 1, 2, 5, 10, 20, 30s
1, 2, 5, 10, 20, 30min, 1h
Specify file (only when PC card has been selected)
• File Type: GBD, CSV
• Name Type: Auto, User
• File: Folder name, file name
Off, I hour, 3 hours, 6 hours, 12 hours, 24 hours
(only when internal memory has been selected)
2 ch
provided.
CHECKPOINT
The maximum sampling interval that can be selected depends on the
number of channels.
• 10ch: 100 ms
• 20ch: 200 ms
Memory:
• 30/40/50 ch: 500ms
• 60ch or more: 1 sec
4 Mbytes (2 Mwords)
This is the total amount of memory. If the number of
channels used is increased, the amount of data that
can be captured is reduced.
Setting method
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Specify file→OK
ENTER→Select→ENTER
ENTER→Select→ENTER