GRAPHTEC GL450 User Manual page 59

Settings and Measurement
u u u u u OTHR Settings Window
Other miscellaneous settings are made here.
Grid
Screen Saver
View in large print
Alarm Hold
Alarm Cancel
Output Alarm at Burnout (AL4)
Start/Stop Confirmation Message Off, On
Power On Start
Room Temp. Compensation
AC Line Frequency (External Filter) 50/60Hz (Off, On)
Burn Out
Temp. Unit
Date/Time
Language
Return to default settings
Grid ..................................... The Grid parameter for display can be specified as either On or Off.
Screen Saver ...................... Turns off the display if the GL450 is not operated within the specified
View in large print ............... This sets whether or not to switch automatically to the next group of
Output Alarm at Burnout ..... If a burnout occurs during temperature measurement, an alarm is
Alarm Hold .......................... This parameter specifies whether or not to maintain the alarm status.
3-24
Setting
Off, On
Off, 1, 2, 5, 10, 30, 60 min
Auto Next Screen, Fixed
Off, On
–
Off, On
Enable, Disable
Internal, External
Off, On
°C, °F
Date, time settings
Japanese, English (US), English (UK)
Yes, No
On: The waveforms are displayed on a grid.
Off. Only the waveforms (without any grid) are displayed.
interval, thus prolonging the product life of the display.
Off: The screen saver does not operate.
Time: The interval can be specified as 1, 2, 5, 10, 30, or 60 minutes.
digital display channels.
Auto Next Screen: The display changes automatically to the next
Fixed:
generated at alarm port number 4.
If the Alarm Hold function is enabled, the alarm status is maintained
until Alarm Cancel is selected.
Selections available
group of channels.
The display can only be changed manually.
Setting method
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→Confirm
ENTER→Select→ENTER
ENTER→Select→ENTER