Software
Alarm
(1) Select CH
Specify a group or groups of channels in the range [1 to 10] through [91 to 100].
(2) Alarm Settings
Function:
Upper:
Lower:
Alarm Output: 1-4
Combination: AND, OR
(3) Logic, Pulse Settings
Device Number: Specifies which of the connected devices to use for logic input.
Logic
• Func.:
• Alarm Output: 1-4
Pulse
• Function:
• Upper:
• Lower:
• Alarm Output: 1-4
(4) Alarm hold
Hold generated alarm:
When an alarm is generated, the alarm status is maintained unless the Alarm Cancel function
is used.
4-22
Off, Hi, Lo, Win In, Win Out
Specifies the condition for alarm generation.
Specifies the Upper Limit Value for the condition specified in Function.
Specifies the Lower Limit Value for the condition specified in Function.
Specifies the number for alarm output to an external device.
Specifies the condition for alarm output.
X (not used)
L (enabled when the signal goes low)
H (enabled when the signal goes high)
Specifies the number for alarm output to an external device.
Off, Hi, Lo
Specifies the condition for alarm generation.
Specifies the Upper Limit Value for the condition specified in Function.
Specifies the Lower Limit Value for the condition specified in Function.
Specifies the number for alarm output to an external device.
CHECKPOINT
Please refer to "r ALM Settings Window" on page 3-17 for further details.