Table of Contents
Advertisement
(2) Select the file to be displayed, and then click the OK button. If waveforms are displayed, the
data can be checked and converted if required.
• The capture Start Time, Capture Time, and Capture Interval are displayed at the upper right
of the screen. Moreover, the selected file name is displayed in the upper part of the
waveform display.
• Two Y Axis. channel ranges can be displayed for Specify the channels as required.
• Waveform Display
If a waveform display color within the Trace list is clicked once, the waveform display for that
channel disappears. Click the color once more to redisplay it. Use this function when you
need to distinguish between overlapped waveforms.
• Waveform Display Range
A scroll bar is displayed underneath the waveform display to indicate which part of the data
is displayed. Simply move the scroll bar to the required position for fast display of that data.
• Cursor Status
Two cursors, A and B, are displayed. The cursor information for the selected two waveform
channels is displayed at the lower right.
CHECKPOINT
The cursor status waveform data information is for the channels specified for the Y axis ranges 1
and 2.
• Comment Input Function
A comment can be input above Cursor A (blue) of the channel specified for Y axis range 1.
Moreover, the comment name that was input during data capture can be changed or moved
as required.
Software
4-43
Advertisement
Table of Contents
