Table of Contents
Advertisement
Specifications
5.3 Accessory/Option Specifications
Control Software
Compatible operating
system
Functions
Main unit settings
Captured data
Display
Display modes
File conversion
Monitor functions
Dual-screen function
Report function
Maximum/Minimum
Battery Pack (Option)
Capacity
Running time
Battery type
Charging method
Time required for charging
Switchover in the case of
a power failure
Other functions
Humidity Sensor B-530 (Option)
Allowable temperature range
Allowable humidity range
Relative humidity
measurement accuracy
Response time
Sensor output
External dimensions
Cable length
5-8
Item
Windows 2000/XP
Main unit control, realtime data capture, data conversion
Input settings, memory settings, alarm settings, trigger settings
Realtime data (CSV, Binary)
Memory data (CSV, Binary)
PC card data
Analog waveforms, logic waveforms, pulse waveforms, digital values
Waveform View, Digital View, Meter View, Report View
Between cursors, All data
Alarm monitor enables sending of email to the specified address
Displays the current data alongside past data
Automatic creation of daily or monthly files
The maximum, minimum and current values are displayed during measurement
Item
7.4 V/2200 mAh; mounted in the main unit
When using the LCD display: approx. 2 hour or more
When using the screensaver: approx. 3 hours or more
Note: The running time depends on the operating environment and the amount of charge
left in the battery.
Lithium secondary battery
Mount in the main unit, or use a separate battery charger
Note: If mounted in the main unit for charging, the power switch must be turned off.
Main unit: approx. 4 hours
Because the battery is used together with the AC adapter, the power supply
will be switched automatically to the battery in the event of a power failure.
Note: The AC adapter is the primary power source.
When the battery is running low, memory data is saved automatically to the
PC card.
When data is being saved directly to the PC card, the file is closed
automatically.
Item
-25 to +80°C
0 to 100% RH
±3% RH (5 to 98% RH at 25°C)
15 s (90% response when membrane filter installed)
0 to 1 VDC
φ14 mm x 80 mm (excluding cable)
3 m
Description
Description
Description
Advertisement
Table of Contents
