Table of Contents
Advertisement
Software
Report View
If the Daily Capture Processing and Monthly Capture Processing checkboxes in SettingsňReport
were checked, the captured data is displayed on the screen in daily capture processing intervals.
Moreover, the daily capture and monthly capture data are saved in the specified format.
CHECKPOINT
To change the setting, change the "Capture Interval" and the "Capture Destination Folder" settings in
the "Report" tab screen in the Settings menu.
This function enables waveforms to be printed. The required settings must be made at the printer in
advance. If settings have been made for several printers, output is made to the active printer.
Minimum/Maximum
While data is being captured, the following data information for the measurement channels is
displayed:
CH, current value, minimum value, minimum value time, maximum value, maximum value time.
4-36
Advertisement
Table of Contents
