Specifications - GRAPHTEC MT100 Quick Start Manual

12. Specifications

Standard Specifications
Item
Number of analog input
External input/output
PC interface
Internal memory devices
Sampling interval
TIME/DIV
Data save functions
(internal and USB memory)
Calculation
Display modes
Message/marker function
Data backup functions
Clock accuracy (23°C environment)
Operating environment
Withstand voltage
Insulation resistance
Power supply
Power consumption
External dimensions
Weight
Other
Interface specifications
Item
Interface types
Ethernet functions
(10BASE-T/100BASE-TX)
USB functions
Realtime data transfer speed 100 msec/10 ch maximum
Digital input specifications
Item
Input/output types
Input specifications
Alarm output specifications Output format: Relay contact output (NO/NC)
39
1 unit (10 channels)
Trigger input, Logic input 4 channels or Pulse input 4 channels, Alarm output
Ethernet (10BASE-T/100BASE-TX), USB (FullSpeed supported) provided as standard features
Internal memory: approx. 14MB
USB memory slot (FullSpeed supported) is provided as a standard feature
100, 125, 200, 250, 500ms, 1, 2, 5, 10, 20, 30sec, 1, 2, 5, 10, 20, 30min, 1 hour
1, 2, 5, 10, 20, 30 sec/DIV, 1, 2, 5, 10, 20, 30min/DIV, 1, 2, 5, 10, 12, 24, 72 hour/DIV
Save data: Measurement data, setup data, copy of data screen
Backup function: Internal to USB memory; internal to FTP server; USB memory to FTP server
* USB memory can be removed during data capture.
Types of statistical calculation: Average value, peak value, maximum value, minimum value, RMS
Calculation between channels: Addition, subtraction, multiplication, and division; calculation of humidity from wet and dry bulb temperature (Channels 1 and 2 only)
Waveform + digital (vertical and horizontal scrolling), digital, and bar graph
Function: Records message/marker at specified timing
Number of registered messages: 8
Marker type: Arbitrary message, start/stop, trigger, alarm, power failure
Setup conditions: EEPROM; Clock: lithium secondary battery
0.002% (approx. 50 seconds per month)
0 to 50°C, 5 to 85%RH
Between AC input and GND: 1 minute at 2000VAC
Between alarm terminal and GND: 1 minute at 1000VAC
Between each input channel and GND: 1 minute at 350Vp-p
Between input terminals: 1 minute at 350Vp-p
Between AC input and GND: 20M
Between alarm terminal and GND: 50M
Between each input channel and GND: 50M
AC input: 100 to 240VAC/50 to 60Hz
Terminal type: M4 screw type terminals
AC power consumption
No.
1
2
* Normal status is when LCD brightness is set to MAX.
H144 x W144 x D200mm
2.1kg
Dust-proof and water-proof IP-65 compatible (only the front panel)
Vibration-tested conditions Equivalent to automobile parts Type 1 Category A classification
Ethernet (10BASE-T/100BASE-TX)
USB (FullSpeed)
Web server function: Displays MT100's screen image on Web browser, operation of MT100
FTP server function: Transfers and deletes files from internal memory and USB memory
FTP client function: Supports backup of data in internal and USB memory
NTP client function: Adjusts internal clock
USB drive mode: Transfers and deletes files from internal memory
• Trigger input (1 ch) • Logic input (4 ch) or Pulse input (4 ch) • Alarm output (4 ch)
* Switch between Logic and Pulse
Maximum input voltage: 0 to +24V (single-ended ground input)
Input threshold voltage: Approx. +2.5V
Hysteresis: Approx. 0.5V (+2.5 to +3V)
Rated: 250VAC/2A
Description
or higher (500VDC)
or higher (500VDC)
or higher (500VDC)
Condition
When the LCD is ON
When the screensaver is operating
Description
Description
38VA
30VA