Setting Up Your Dvr For Remote Connectivity; System Requirements - Lorex LHD100 SERIES Instruction Manual

Setting up your DVR for Remote Connectivity

The system features a built-in browser-based software that allows you to access your
system remotely over your local area network (LAN) or over the Internet using Internet
Explorer (PC). A Client Software for PC or Mac is also available. Follow the steps below to
®
configure your system for remote connection.
NOTE: Except where noted, the instructions in this section are the same for PC and Mac users.

System Requirements

Prior to using the Web Client or Client Software, make sure your system meets or exceeds
the following system requirements:
Description
CPU
Intel Core2 Duo
Memory 2 GB RAM
Video 128 MB of video memory
Operating Windows XP SP2 or above (Direct X 9.0 and above)
System*
Windows Vista/7 (Direct X 9.0 and above)
Mac OSX 10.7 and above (Intel processors only)
Network (WAN) 384 Kbps upstream
High-speed Internet service is recommended to remotely connect to your DVR.
Network (LAN) 10/100 BaseT Network
Hard Drive at least 1 GB of free hard drive space
Space
NOTE: When connecting remotely, Live Viewing resolution is reduced to conserve bandwidth.
Playback resolution is equal to your high definition recording resolution. Because of
this, playback may perform slowly over the Internet due to bandwidth constraints.
NOTE: If a user connects to the system remotely, there may be slow performance when
accessing the system locally. This is normal, and not a malfunction.
* For the latest compatibility list, check www.lorextechnology.com, as new software versions are
released to the market.
Minimum Requirements
®
2.0GHz
Setting up your DVR for Remote Connectivity
Recommended
®
Intel Core2 Quad 2.66GHz or above
4 GB RAM and above
512 MB of video memory and above
81